SRO30S – 101.0MM X 37.0MM X 60.5MM Rubidium Oscillator

3D Product View

3D View

Features

• 10MHz Frequency
• ±0.3ppb Frequency Stability
• Sinewave

Applications

• Military Communication Equipment
• Base Stations
• Test Equipment
• Synthesizers
• Digital Switching

Part Number Builder

Please choose your parameters to build a part number:

Part Numbering Guide

SRO30 Part Numbering Guide

Electrical Parameters

ParametersUnitsMinTypicalMaxRemarks
FrequencyMHz10.0
Frequency Tolerance at +25ºCppb-0.05+0.05
Frequency Stabilityppb-0.3+0.3
Short Term Stability
               1 Secondppb-0.003+0.003
               10 Secondsppb-0.003+0.003
               100 Secondsppb-0.002+0.002
               1 Hourppb-0.001+0.002
Aging
               Dayppb-0.003+0.003
               Monthppb-0.04+0.04
Magnetic Field Sensitivity (Gauss)ppb-0.02+0.02
Retraceppb-0.02+0.02
Operating Temperature°C-4060
Storage Temperature°C-4090
Supply Voltage*V12.0*Will operate over 12V to 15V Range
Power Consumption Start up @ 25°CA1.822W @ 12V
Power Consumption Steady StateA0.56W @ 12V
Warm-up TimeMinutes8@ 25°C
Pullingppb-2.0+2.0
Control VoltageV2.5
Input ImpedanceΩ10k
Output CompatibilitySine
Drive CapabilityΩ50
Output LeveldBm6810
Phase Noise
               @ 1HzdBc/Hz-113
               @ 10HzdBc/Hz-138
               @ 100HzdBc/Hz-152
               @ 1kHzdBc/Hz-155
               @ 10kHzdBc/Hz-158
HarmonicsdBc-30
SpuriousdBc-100
Note : The oscillator will detect if no control voltage is applied to Pin 7 and will automatically set the control voltage internally to 2.5V.
Note : Rx and Tx connections for RS232 communication of the status of the oscillator.

Outline Drawing & Recommended Landed Pattern

All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
keyboard_arrow_up