For high speed data transfer applications (transceiver or clock distribution) that require a high data rate, introducing our new LVDS Crystal Oscillator. Suntsu’s CEO, Casey Conlan enthused, “our high-speed networking customers will be clamoring to get their hands on this part!”
The SUO75L Series Oscillator is designed with a third overtone crystal and a frequency range of 80MHz to 200MHz at 3.3V and 2.5V (100MHz to 200MHz at 1.8V). It boasts an ultra-low phase jitter performance of 100fs typical (200fs MAX) and low power consumption of 15mA typical at 1.8V [2]. LVDS (Low Voltage Differential Signaling) is like LVPECL (Low Voltage Positive Emitter Coupled Logic) but has lower power consumption (100Ω output impedance) and lower EMI emissions with better jitter performance [1].
Key features include:
- Third overtone crystal design
- Supply voltages of 1.8V, 2.5V, and 3.3V
- Low power consumption
- Ultra-Low Phase Jitter Performance
- 7.0 x 5.0mm SMD package size
- Frequency Stability down to ±20ppm
- Operating temperatures between -40°C – +85°C
Applications include:
- Transceiver and clock distribution
- Ethernet, Gbe, SyncE
- Fibre Channel
- FPGAs
- Storage Area Networking
- PON (Passive Optical network)
- Telecom and Networking
Contact a Suntsu sales representative for more information!
References
[1] Bliley Technologies. “Which Crystal Oscillator Output Signal Is Best for Your Application?” Available at: https://blog.bliley.com/crystal-oscillator-output
[2] SiTime. “Clock Jitter Definitions and Measurement Methods” Available at: https://www.sitime.com/support/resource-library/application-notes/an10007-clock-jitter-definitions-and-measurement-methods
[3] Suntsu Electronics. “Suntsu’s Lowest Current Consumption LVPECL and LVDS Oscillators!” Available at: https://suntsu.com/blog/suntsus-lowest-current-consumption-lvpecl-and-lvds-oscillators/