Posts by Nathaniel Larson

Degson’s June New Product announcement had 13 new interconnect and terminal block solutions.  The smallest but clever product is the K78 – a barebones type board to wire connector.  With the DG636S-6.35 and DG218-2.5; Degson has innovated in 45? insertable 630V and 160V rated industrial terminal blocks. What really excited us was the DG271V-7.5-DA-06AH.  This…

Winstar just sent us Issue No. 100 of their new product introduction newsletter as they continue to create cutting edge and innovative products. First, the WF70M 7.0″ M Series is a TFT-LCD system that includes a built-in control board that supports both an RS232 and SPI interface.  This flexibility allows product designers to us the…

ECE has announced a new Plug and Socket series for board to board interconnects.   The EBB-PS25 Series includes a mating EBB-PS25 Plug and EBB-PS25 Socket with a fine pitch of 0.635mm contact spacing.  The series allows two PCB boards to get a secure connection for up to 60 pins. To learn more, contact us.

Degson announced three new products to support a wide range of applications as well as  more products in the modular industrial automation terminal blocks. The DG220A/B-2.1 is a great push-in termination system for junction boxes.   The DGK11-001 is an IP64 protected, UV proof enclosure with rail interface system.  And the DG213-5.0 (pictured) is a…

At Suntsu Electronics, we have seen the design challenges of our  Automatic Meter Reading (AMR) customers get ever more complex and compact over the past 4 years.  In the case of electric and other utility meters, the compact designs means a close proximity to both: power wires carrying high voltages and high currents that can…

Lighting the way towards the next chapter in LED evolution, SunLED introduces the HRS Series of Heart Rate Sensor LEDs.  These LEDs are ideal for compact devices such as wearable electronics. Read more in SunLED’s February 2017 Digital Newsletter, click here. For more information, contact us today!

Once a year, the Audio Engineering Society (AES) holds a 4th Quarter show at the L.A. Convention Center. This year, we are happy to say that the touch of Nexsun can be seen and felt throughout the show. Picture above is one our customer’s exciting new entries into the Audio Networking. The board in green…

Winstar has announced the production introduction of two new displays. The first is a 5 inch TFT LCD display model number WF50C. The WF50C includes a built in ILI6480H2 LCD driver; and supports 24-bit RGB parallel interface. Nexsun likes the WF50C because it can be used for industrial controls, medical applications, and other hardened conditions. The second…

Board-to-Wire and Barrier Industrial Grade Terminal Blocks The 5EDGKG-10.16 is a new IP20 protected terminal block / interconnect system. It falls into the family of board to wire terminal block. The IP20 protection means that the both the connector and the wire-side interconnect is protected from fingers and objects greater than 12 millimeters (or about…

Degson just released their New Product Information newsletter for April 2016. There are two new exciting product families. First is the DG2002-4.0 / DG2001-3.0 and DG2003-6.0  terminal block interconnect systems.  The DG027 and DG028 are actually tools that allows the installers the ability to getting their wires into and out of the terminal block with…

More and more, electrical products are exposed to the harsh outdoor or industrial environment.   The typical aluminum electrolytic capacitor are, at its core, dependent on liquid electrolytes.  While useful in a typical indoor environment; the liquid-based electrolytic capacitor can have reduced reliability due to the dry-out when in a harsh environment and a change to the…