Posts by Mun KH

By Dr. KH MunWinstar, a maker of industrial displays, has released two models of 10.1 inch IPS TFT-LCD. We are particularly excited by the WF101GTAAPLNT0.  The WF101GTAAPLNT0 is the resistive touch anti-glare model designed for bright lighting conditions or outdoor.  Resistive touch screens are typically more durable when exposed dust and water. And it can detect stylus, gloved-hands…

By Dr. KH MunGoodsky/ECE introduces a very innovative series of Reflow Solderable Relays in both SMT and Through-hole type.  By being designed to go through the high temperatures of solder reflow, the through-hole type relay allow PCB assembly to go through only one production reflow soldering process. There is no longer needing additional wave or…

By Dr. KH MunDegson’s June New Product announcement had 13 new interconnect and terminal block solutions.  The smallest but clever product is the K78 – a barebones type board to wire connector.  With the DG636S-6.35 and DG218-2.5; Degson has innovated in 45? insertable 630V and 160V rated industrial terminal blocks. What really excited us was…

By Dr. KH MunWinstar just sent us Issue No. 100 of their new product introduction newsletter as they continue to create cutting edge and innovative products. First, the WF70M 7.0″ M Series is a TFT-LCD system that includes a built-in control board that supports both an RS232 and SPI interface.  This flexibility allows product designers…

By Dr. KH MunECE has announced a new Plug and Socket series for board to board interconnects.   The EBB-PS25 Series includes a mating EBB-PS25 Plug and EBB-PS25 Socket with a fine pitch of 0.635mm contact spacing.  The series allows two PCB boards to get a secure connection for up to 60 pins. To learn…

By Dr. KH MunDegson announced three new products to support a wide range of applications as well as  more products in the modular industrial automation terminal blocks. The DG220A/B-2.1 is a great push-in termination system for junction boxes.   The DGK11-001 is an IP64 protected, UV proof enclosure with rail interface system.  And the DG213-5.0…

By Dr. KH MunAt Suntsu Electronics, we have seen the design challenges of our  Automatic Meter Reading (AMR) customers get ever more complex and compact over the past 4 years.  In the case of electric and other utility meters, the compact designs means a close proximity to both: power wires carrying high voltages and high…

By Dr. KH Mun Lighting the way towards the next chapter in LED evolution, SunLED introduces the HRS Series of Heart Rate Sensor LEDs.  These LEDs are ideal for compact devices such as wearable electronics. Read more in SunLED’s February 2017 Digital Newsletter, click here. For more information, contact us today!

By Dr. KH MunWinstar has announced the production introduction of two new displays. The first is a 5 inch TFT LCD display model number WF50C. The WF50C includes a built in ILI6480H2 LCD driver; and supports 24-bit RGB parallel interface. Nexsun likes the WF50C because it can be used for industrial controls, medical applications, and other hardened…

By Dr. KH Mun Board-to-Wire and Barrier Industrial Grade Terminal Blocks The 5EDGKG-10.16 is a new IP20 protected terminal block / interconnect system. It falls into the family of board to wire terminal block. The IP20 protection means that the both the connector and the wire-side interconnect is protected from fingers and objects greater than…

By Dr. KH MunDegson just released their New Product Information newsletter for April 2016. There are two new exciting product families. First is the DG2002-4.0 / DG2001-3.0 and DG2003-6.0  terminal block interconnect systems.  The DG027 and DG028 are actually tools that allows the installers the ability to getting their wires into and out of the…