LGN2X101MELC30

The LGN2X101MELC30 is a 100 µF, 600 V aluminum electrolytic capacitor in a snap‑in radial can designed for general‑purpose power and board‑mount applications. It is a smaller-sized member of the LGN series optimized for high-voltage designs that require a compact snap‑in package and robust thermal performance up to 105°C.

Key value: a 600 V rated voltage combined with specified ripple handling and extended high-temperature endurance makes this part suitable for high-voltage filtering and DC link applications where space and thermal reliability matter.

Key Features

• Capacitance & Voltage — 100 µF nominal capacitance at a 600 V rated voltage, ±20% tolerance.
• High-Temperature Rating — Rated for operation up to 105°C; designed for long-term use at elevated temperatures.
• Endurance — Meets endurance requirements for parts rated at 600 V of 2000 hours at 105°C when subjected to D.C. bias plus rated ripple current.
• Ripple Current Performance — Specified ripple: 670 mA at 120 Hz (low frequency) and 958.1 mA at 100 kHz (high frequency), supporting effective smoothing in power applications.
• Package & Mounting — Snap‑in terminal radial can for robust board mounting; package dimensions approximately L: 3.0 cm × D: 3.5 cm with a maximum seated height of 1.181 inches.
• Electrical Loss & Leakage — Tan δ specification up to 0.20 for 450–600 V (measured at 120 Hz, 20°C) and leakage current defined by I ≤ 3/√C (μA) after 5 minutes at 20°C.
• Low‑Temperature Stability — Impedance ratio Z(–25°C)/Z(+20°C) up to 8 for 350–600 V, preserving performance in cold conditions within the rated category.
• RoHS Compliant — Conforms to the RoHS directive (2011/65/EU, (EU)2015/863).

Typical Applications

• General‑Purpose Power Circuits — 100 µF at 600 V provides bulk capacitance for general high‑voltage board-level power components.
• High‑Voltage Filtering — Snap‑in mounting and specified ripple capability support filtering and smoothing in high‑voltage DC circuits.
• DC Link / Energy Storage — Compact 30 × 35 mm package and high voltage rating suit compact DC link implementations where space is constrained.

Unique Advantages

• High Voltage Capacity: 600 V rating allows use in higher voltage systems without upsizing standard components.
• Compact Snap‑In Package: Smaller-sized LGN series case with snap‑in terminals delivers reliable board retention while saving PCB space.
• Thermal Endurance: Rated for operation to 105°C with a defined 2000‑hour endurance at 105°C for 600 V parts, supporting durability under sustained thermal stress.
• Measured Ripple Ratings: Specified ripple current at both 120 Hz and 100 kHz gives clear design parameters for low‑ and high‑frequency smoothing requirements.
• Defined Electrical Limits: Clear tan δ and leakage current specifications allow predictable impedance and leakage budgeting in design validation.

Why Choose LGN2X101MELC30?

The LGN2X101MELC30 combines a high 600 V rating, compact snap‑in packaging and defined high‑temperature endurance to address demanding board‑level power applications. Its specified ripple current, leakage and tan δ limits enable predictable integration into power filtering, DC link and other general‑purpose high‑voltage circuits.

This part is suited to engineers and procurement teams who need a verifiable, RoHS‑compliant aluminum electrolytic solution with clear electrical and thermal performance data for reliable, compact high‑voltage designs.

Request a quote or submit your specifications to receive pricing and availability information for the LGN2X101MELC30.