LAR2D561MELZ35

The LAR2D561MELZ35 is a snap‑in terminal aluminum electrolytic capacitor rated at 560 µF and 200 V. It is a radial, can‑style, snap‑in component intended for general‑purpose electronic applications that require high voltage capability in a compact footprint.

This capacitor delivers robust ripple current handling (1.6 A at 120 Hz and 2.4 A at 50 kHz), a specified tan δ of 0.15 (at 20°C, 120 Hz), and long endurance with demonstrated performance after 2000 hours at 105°C. It is RoHS compliant and supplied in tray packaging for production use.

Key Features

• Capacitance & Voltage — 560 µF rated capacitance at 200 V for applications requiring mid‑size energy storage in a snap‑in package.
• Package & Mounting — Radial, can‑style snap‑in terminal type designed for secure panel or board mounting; physical size: 22 mm diameter × 35 mm length.
• Tolerance — ±20% capacitance tolerance at 120 Hz, 20°C to match design margin expectations.
• Temperature & Endurance — Operating temperature range of −40°C to +105°C with endurance validated for 2000 hours at 105°C under rated ripple conditions.
• Ripple Current Handling — Low‑frequency ripple current 1.6 A at 120 Hz and high‑frequency ripple current 2.4 A at 50 kHz to support demanding power supply ripple conditions.
• Leakage & Loss — Rated leakage current approximately 1000 µA and maximum tan δ of 0.15 (measured at 20°C, 120 Hz) for predictable electrical performance.
• Safety & Overvoltage Behavior — Designed for reduced incidence of shorting under overvoltage conditions (per datasheet overvoltage evaluation) and specified behavior when subjected to 1.5× rated voltage under limited current test conditions.
• Compliance & Packaging — RoHS compliant and available in tray packing for volume production readiness.

Typical Applications

• General‑Purpose Electronics — Suited for general‑purpose circuits requiring a 560 µF, 200 V snap‑in aluminum electrolytic solution.
• Power Supply Modules — Provides specified ripple current capability (1.6 A at 120 Hz / 2.4 A at 50 kHz) and high‑temperature endurance for power rail smoothing in assemblies operating up to 105°C.
• Industrial Equipment — Radial snap‑in format and tray packing support production assembly for industrial control and power distribution equipment where long life at elevated temperature is required.

Unique Advantages

• High‑Voltage, Compact Form — 200 V rating in a 22 mm × 35 mm can offers a balance of voltage capability and compact size for space‑constrained designs.
• Proven High‑Temperature Endurance — Withstanding 2000 hours of rated ripple current at 105°C provides predictable life performance in high‑temperature environments.
• Broad Ripple‑Frequency Support — Specified ripple current at both low (120 Hz) and high (50 kHz) frequencies addresses a range of power conversion and filtering scenarios.
• Manufacturing‑Friendly Packaging — Tray packing and snap‑in terminal design simplify handling and installation in production workflows.
• Regulatory Compliance — RoHS compliance supports use in regions and products requiring restricted substance conformance.

Why Choose LAR2D561MELZ35?

The LAR2D561MELZ35 positions itself as a reliable, general‑purpose aluminum electrolytic capacitor for designs that need 560 µF at 200 V in a snap‑in, radial can package. Its combination of rated ripple capability, defined tan δ, controlled leakage, and validated 2000‑hour endurance at 105°C makes it suitable for production systems where predictable electrical and thermal performance matters.

For teams specifying capacitors for mid‑voltage power supplies, industrial electronics, or other general‑purpose applications, this part delivers a documented balance of electrical characteristics, environmental compliance, and production packaging to support volume deployment.

Request a quote or contact sales for pricing, availability, and lead‑time information tailored to your production requirements.