LGL2W391MELC30

CAP ALUM 390UF ±20% 450V SNAP-IN
Part Description

390 µF 450 V ±20% Aluminum Electrolytic Capacitor, Snap-In

Quantity 1,712 Available (as of November 3, 2026)
Product CategoryAluminum Electrolytic Capacitors
Part SeriesLGL
ManufacturerNichicon
Manufacturing StatusMass Production
Manufacturer Standard Lead TimeContact Us
Datasheet

Specifications & Environmental

ApplicationsGeneral PurposeCapacitance390 µFECCNEAR99
ESRN/AHeight Seated (Max)3.2 cmHTS Code8532.22.0040
ImpedanceN/ALead SpacingN/ALifetime @ Temp2000 h @ 105°C
Moisture Sensitivity LevelN/AMounting MethodSnap InOperating Temperature-25°C - 105°C
Package / CaseRadial, Can - Snap-InPolarizationPolarRatingsN/A
REACH ComplianceREACH UnaffectedRipple Current High Frequency1.83 A @ 50 kHzRipple Current Low Frequency1.28 A @ 120 Hz
RoHS ComplianceCompliantSize / Dimension30 x 35 mmSurface Mount Land SizeN/A
Tolerance-20%~20%Voltage450 V

Overview of LGL2W391MELC30 – Aluminum Electrolytic Capacitor, Snap‑In, 450 V, 390 µF

The LGL2W391MELC30 is a Nichicon LGL series aluminum electrolytic capacitor in a snap‑in terminal radial can. It provides 390 µF capacitance at a 450 V rating in an ultra‑smaller-sized 35 × 30 mm package with tray packing for mass production.

Designed for general‑purpose high‑voltage power applications, this capacitor combines a 105 °C operating range with a 2000‑hour endurance rating at 105 °C, making it suitable where elevated temperature tolerance and long service life are required.

Key Features

  • Capacitance & Voltage — 390 µF nominal capacitance with a 450 V rated voltage and ±20% tolerance (at 120 Hz, 20 °C).
  • High‑temperature endurance — Rated for operation from −25 °C to +105 °C with an endurance specification of 2000 hours at 105 °C (capacitance ±20%, tan δ ≤200% of initial, leakage ≤ initial).
  • Snap‑in radial can package — Snap‑in terminal mounting for secure PCB attachment; package listed as radial, can ‑ snap‑in and supplied in tray packing for mass production.
  • Low‑frequency and high‑frequency ripple capability — Ripple current specified as 1.28 A at 120 Hz and 1.83 A at 50 kHz for this part, with frequency coefficients up to 1.43 at 50 kHz or more (400–450 V series).
  • Leakage and dissipation characteristics — Leakage current meets I ≤ 3√C (µA) after 5 minutes at 20 °C; tangent of loss angle (tan δ) max 0.20 at 450 V (measured at 120 Hz, 20 °C).
  • Compact footprint — Physical size approximately 35 × 30 mm (φ35 × 30 L) to save board space in high‑voltage designs.
  • Polarized element — Polarized aluminum electrolytic construction for bulk energy storage and smoothing in DC circuits.

Typical Applications

  • High‑voltage power supplies — Bulk filtering and smoothing in general‑purpose high‑voltage power supply modules where 450 V rating and elevated temperature capability are required.
  • Industrial power electronics — Energy storage and ripple handling in general industrial power systems that demand long endurance at 105 °C.
  • General‑purpose electronic equipment — DC bus decoupling and bulk capacitance in general‑purpose equipment and assemblies produced in volume (tray packing supports mass production).

Unique Advantages

  • High nominal voltage (450 V) — Enables use in higher DC bus and power supply applications without series stacking.
  • 105 °C rated with 2000 h endurance — Demonstrates long‑term stability under elevated temperature conditions with defined post‑test limits for capacitance, tan δ and leakage.
  • Frequency‑aware ripple performance — Specified ripple current at 120 Hz and 50 kHz plus frequency coefficients (up to 1.43 at ≥50 kHz) clarifies performance across common ripple conditions.
  • Secure snap‑in mounting — Snap‑in terminals provide robust mechanical retention for through‑hole PCB assemblies in production environments.
  • Compact, production‑friendly packaging — φ35 × 30 mm footprint and tray packing streamline layout and automated assembly for high‑volume manufacturing.
  • Measurable loss and leakage limits — Specified tan δ and leakage current formulas support predictable electrical behavior and selection for sensitive designs.

Why Choose LGL2W391MELC30?

The LGL2W391MELC30 positions itself as a practical solution for general‑purpose high‑voltage applications that require a compact, snap‑in aluminum electrolytic capacitor with verified high‑temperature endurance. Its 450 V rating, 390 µF capacitance, and specified ripple and leakage characteristics provide engineers with clear, verifiable parameters for design and qualification.

Ideal for teams designing high‑voltage power supplies, industrial power modules, and general‑purpose electronic equipment where board space, reliable mounting, and long life at elevated temperature are priorities. The Nichicon LGL series data provides the measurable specs needed for confident component selection and production planning.

Request a quote or submit a pricing inquiry to receive availability and lead‑time information for the LGL2W391MELC30. Our sales team can provide production‑packing details and support for volume requirements.

Request a Quote

















    No file selected



    Our team will respond within 24 hours.


    I agree to receive newsletters and promotional emails. I can unsubscribe at any time.

    Certifications and Membership
    NQA AS9100 CMYK ANAB
    NQA AS9100 ANAB Badge
    ESD2020 Badge
    ESD2020 Association Badge
    GIDEP Badge
    GIDEP Badge
    Suntsu ERAI MemberVerification
    Suntsu ERAI Member Verification
    Available Shipping Methods
    FedEx
    UPS
    DHL
    Accepted Payment Methods
    American Express
    American Express
    Discover
    Discover
    MasterCard
    MasterCard
    Visa
    Visa
    UnionPay
    UnionPay

    Date Founded: 1950


    Headquarters: Nakagyo, Kyoto, Japan


    Employees: 5,000+


    Revenue: $1.2 Billion


    Certifications and Memberships: ISO9001:2015, IATF16949:2016


    Featured Products
    Latest News
    keyboard_arrow_up