UPW1J471MHD
| Part Description |
470 µF 63 V ±20% Aluminum Electrolytic Capacitor, Radial Lead |
|---|---|
| Quantity | 1,506 Available (as of November 3, 2026) |
| Product Category | Aluminum Electrolytic Capacitors |
|---|---|
| Part Series | UPW |
| Manufacturer | Nichicon |
| Manufacturing Status | Mass Production |
| Manufacturer Standard Lead Time | Contact Us |
| Datasheet |
Specifications & Environmental
| Applications | Automotive | Capacitance | 470 µF | ECCN | EAR99 | ||
|---|---|---|---|---|---|---|---|
| ESR | N/A | Height Seated (Max) | 2.7 cm | HTS Code | 8532.22.0020 | ||
| Impedance | 140 mOhm | Lead Spacing | 5 mm | Lifetime @ Temp | 7000 h @ 105°C | ||
| Moisture Sensitivity Level | N/A | Mounting Method | Radial Lead | Operating Temperature | -55°C - 105°C | ||
| Package / Case | Radial, Can | Polarization | Polar | Ratings | AEC-Q200 | ||
| REACH Compliance | REACH Affected | Ripple Current High Frequency | 1.72 A @ 10 kHz | Ripple Current Low Frequency | 1.29 A @ 120 Hz | ||
| RoHS Compliance | Compliant | Size / Dimension | 25 x 12.5 mm | Surface Mount Land Size | N/A | ||
| Tolerance | -20%~20% | Voltage | 63 V |
Overview of UPW1J471MHD – 63 V, 470 µF Radial Lead Aluminum Electrolytic Capacitor
The UPW1J471MHD is a radial-lead aluminum electrolytic capacitor designed for compact power systems and switching power supplies. It offers a 470 µF capacitance at a 63 V rating in a miniature φ12.5 × 25 mm can, delivering low impedance and reliable ripple handling for power filtering and energy storage.
Built for demanding thermal environments, this part supports an operating temperature range of −55 °C to +105 °C and a rated life of 7000 hours at 105 °C, making it suitable for long-life, high-reliability applications including those requiring AEC-Q200 qualification.
Key Features
- Capacitance and Voltage — 470 µF nominal capacitance with a 63 V rated voltage and a tolerance of −20% to +20% for stable bulk energy storage.
- Low Impedance — 140 mΩ impedance that improves transient response and reduces voltage ripple in power rails.
- High Ripple Current Capability — Rated ripple currents of 1.29 A at 120 Hz and 1.72 A at 10 kHz enable effective smoothing at both low and high switching frequencies.
- Loss Tangent — tanδ of 0.09 (measured at 20 °C, 120 Hz) for predictable AC loss behavior in filtering applications.
- Long Endurance — 7000 hours life at 105 °C under rated voltage and ripple conditions for extended service life in thermal stress environments.
- Wide Temperature Range — Rated for −55 °C to +105 °C to support a broad set of environmental conditions.
- Compact Radial Can — Package φ12.5 × 25 mm with 5 mm lead spacing and radial-lead mounting for through-hole assemblies and robust mechanical retention.
- AEC-Q200 Rated — Series-level AEC-Q200 rating for automotive-grade reliability where applicable.
- Polarized, Pressure Relief — Polarized aluminum electrolytic construction with pressure relief vent typical of radial lead types for safety in fault conditions.
Typical Applications
- Switching Power Supplies — Bulk filtering and output smoothing for regulated supplies in compact converters.
- DC-DC Converters — Energy storage and ripple suppression in both low- and high-frequency converter stages.
- Automotive Electronics — Power filtering and decoupling in automotive subsystems where AEC-Q200 qualification is required.
- Industrial Power Modules — Filtering and buffer capacitance in industrial control and power management modules operating across wide temperature ranges.
Unique Advantages
- High ripple handling across frequencies: Specified ripple current of 1.29 A (120 Hz) and 1.72 A (10 kHz) combined with frequency coefficients from the UPW series datasheet enables designers to size capacitors for both low- and high-frequency switching environments.
- Low impedance for improved transient response: 140 mΩ impedance reduces voltage droop during load transients, improving regulator stability and performance.
- Long high-temperature life: 7000 hours at 105 °C provides predictable long-term performance in thermally demanding applications.
- Compact through-hole form factor: φ12.5 × 25 mm radial can with 5 mm lead spacing offers a space-efficient, mechanically robust solution for PCB-mounted power sections.
- Automotive-capable design: AEC-Q200 rating supports use in designs requiring automotive-grade reliability and testing standards.
- Clear electrical characterization: Specified tanδ, leakage current, and impedance values allow precise thermal and electrical design trade-offs.
Why Choose UPW1J471MHD?
The UPW1J471MHD balances compact size, low impedance, and high ripple capability for reliable power filtering in switching supplies, DC-DC converters, and automotive or industrial power systems. Its 63 V rating, 470 µF capacitance, and 7000-hour endurance at 105 °C provide designers with a predictable, durable option for demanding thermal and electrical environments.
Well-suited for engineers specifying through-hole capacitors where long life, stable AC characteristics (tanδ), and certified reliability matter, this part offers a focused combination of electrical performance and mechanical packaging that simplifies BOM decisions for high-reliability power designs.
Request a quote or submit a parts inquiry to receive pricing, availability, and lead-time information for UPW1J471MHD.
Date Founded: 1950
Headquarters: Nakagyo, Kyoto, Japan
Employees: 5,000+
Revenue: $1.2 Billion
Certifications and Memberships: ISO9001:2015, IATF16949:2016