A31G226CL2N

The A31G226CL2N is a member of the Abov A31G22x series, engineered as a main controller for a wide range of appliances. It integrates an ARM Cortex-M0+ 32-bit core running up to 48 MHz with on-chip flash and data flash, multiple serial interfaces and rich peripheral sets for sensor and device control.

This device targets appliance and embedded control applications that require a balance of performance, integration and robust operating conditions, with a wide supply range and extended temperature support.

Key Features

• Core — ARM Cortex-M0+ 32-bit core running up to 48 MHz for deterministic control and efficient code density.
• Memory — 256 Kbytes code flash, 32 Kbytes data flash and 20 Kbytes SRAM; supports memory bank swap and read-protection features for security.
• Power & Clock — Operates from 1.8 V to 5.5 V with internal and external oscillator options, multiple run/sleep/deep-sleep modes, and low-voltage detection and reset functions to support power-managed designs.
• Timers & PWM — Multiple timers including seven 16-bit and two 32-bit general-purpose timers plus watchdog and watch timer; 16-bit PWM with 3-phase complementary PWM generators for motor and power conversion control.
• Analog — 12-bit ADC with 14 channels and integrated 12-bit DAC for precise sensor acquisition and analog output control.
• Interfaces — Multiple serial peripherals including I2C, SPI, UART and USART channels, enabling flexible sensor and peripheral interfacing.
• DMA & CRC — 8-channel DMA for efficient data movement and multi-width CRC generator (CRC-7/8/16/32) for data integrity checks.
• Display & GPIO — Integrated LCD driver (48-pin support: 8 × 21 or 3 × 26) and sink-type high current output ports for direct UI and indicator driving. Total I/O count: 43.
• System Reliability — IEC60730 qualification and operating range of −40 °C to +105 °C for appliance-grade environmental tolerance.
• Package & Mounting — 48-pin LQFP (7 × 7 mm, 0.5 mm pitch) surface-mount package suitable for compact board-level designs.
• Development & Debug — SWD debug interface and device-level features documented in the A31G22x datasheet to support development and validation.

Typical Applications

• Home Appliances — Central controller for appliances (e.g., laundry, refrigeration, kitchen equipment) handling user interfaces, sensor management and motor control.
• UI & Display Control — Drives LCD segments and high-current indicators, enabling integrated user interfaces and status displays.
• Sensor Hub & Monitoring — Multi-channel 12-bit ADC and serial interfaces allow precise acquisition from multiple sensors and communication with peripheral modules.
• Motor and Power Control — 16-bit PWM with 3-phase complementary outputs and multiple timers for pump, fan and motor drive control in appliance systems.

Unique Advantages

• Integrated memory and data flash: 256 KB code flash plus 32 KB data flash reduce external memory needs and simplify firmware storage strategies.
• Wide supply and temperature range: 1.8–5.5 V operation and −40 °C to +105 °C rating support a range of appliance power domains and harsh operating environments.
• Rich peripheral mix: Multiple UART/USART, I2C, SPI channels, ADC and DAC enable direct connection to sensors, actuators and user-interface components, reducing BOM and board complexity.
• Hardware acceleration for reliability: DMA and CRC engines offload routine tasks and integrity checks from the CPU to improve system performance and reliability.
• Appliance-focused features: LCD driver options, high-current sink outputs and IEC60730 qualification make the part well-suited for consumer appliance control and safety requirements.

Why Choose A31G226CL2N?

The A31G226CL2N combines a capable Cortex-M0+ processing core with abundant on-chip memory, mixed-signal peripherals and appliance-oriented features to deliver an integrated controller platform. Its voltage flexibility, extended temperature rating and IEC60730 qualification align with embedded appliance requirements for durability and safety.

This device is well-suited for engineers designing appliance control, user interface and sensor-driven systems who need a compact package (48-LQFP), multiple serial interfaces and high integration to reduce BOM and simplify system architecture. Documentation and device-level features in the A31G22x family support development and long-term product deployment.

Request a quote or contact sales for pricing, lead time and technical support to evaluate A31G226CL2N for your next appliance or embedded control design.