A34M420YL

The A34M420YL is a high-performance 32-bit microcontroller based on the Arm® Cortex®-M4F core with FPU, delivering up to 140 MHz operation and 174 DMIPS for compute-intensive embedded control. It integrates motor-control–focused peripherals, multi-channel ADCs and extensive I/O to address inverter motor controllers, electric pumps and fans, and home-appliance display and control applications.

This device combines large on-chip memory, dual-bank code flash for OTA-enabled workflows, comprehensive timers and DMA, and a broad operating voltage and temperature envelope to streamline system design for industrial and consumer motor-control products.

Key Features

• Core & Performance — Arm® Cortex®-M4F core with FPU running up to 140 MHz, providing 174 DMIPS for advanced control algorithms and signal processing.
• Memory Architecture — Up to 1,024 KB dual-bank code Flash (512 KB + 512 KB) supporting bank swap and read-while-write for OTA workflows, plus 32 KB data Flash and up to 64 KB SRAM with ECC.
• Analog & Data Conversion — Three independent 12-bit ADC blocks with 24 analog input channels and up to 1,500 ksps aggregate sampling, configurable for single, sequence and burst conversions with adjustable sample/hold times.
• Motor Control PWM — Two MPWM generators capable of driving 3-phase signals with 16-bit up/down counters and six phase outputs; includes multiple ADC trigger sources for synchronized sampling.
• Timers & Real-Time — Ten 16-bit timers with capture/output channels and periodic/one-shot/PWM modes, plus two 32-bit free-run timers and a 32-bit watchdog timer with prescalers.
• High-Speed DMA & CRC — 16-channel DMA controller (8/16/32-bit transfers) compatible with 24 peripheral types and a dedicated CRC unit supporting CRC-32/CRC-16/CRC-8/CRC-7 with DMA compatibility.
• Serial Connectivity — Multiple communications ports: six UART (16450-style), three SPI and two I²C for device and system interfacing.
• Security & System Utilities — On-chip random-number generator (32-bit output with programmable seed) and support for device debug via SWD/JTAG.
• Power, Clocks & Oscillators — Flexible clocking with internal HSI (32 MHz) and LSI (500 kHz), external HSE/LSE support and PLL to reach 140 MHz; power management features include POR/LVR/LVI and low-power modes.
• Operating Range & Package — Wide supply range and industrial temperature support with up to 107 I/O pins; available in 120-LQFP (16 × 16 mm, 0.5 mm pitch).

Typical Applications

• Inverter Motor Controllers — High-resolution MPWM and synchronized multi-channel ADCs enable precise motor commutation and feedback control loops.
• Electric Pumps & Fans — On-chip timers, PWM generators and DMA reduce CPU load while providing efficient motor drive and system monitoring.
• Home Appliances — Integrated Flash, SRAM, peripheral set and display/control interfaces make it suitable for appliance control and user-interface subsystems.

Unique Advantages

• Highly integrated motor-control peripherals: Two 3-phase MPWM generators and three 12-bit ADCs with 24 channels reduce external components and simplify board design.
• Dual-bank code Flash for OTA workflows: 1,024 KB dual-bank Flash with bank-swap and RWW supports in-field firmware updates and minimizes service downtime.
• Performance headroom for control algorithms: Cortex-M4F with FPU at up to 140 MHz (174 DMIPS) enables compute-heavy control and signal processing on-chip.
• System offload via DMA and timers: 16-channel DMA plus multiple timers and free-run counters offload routine tasks from the CPU to improve real-time responsiveness.
• Robust operating envelope: Broad supply and temperature ranges and ECC-protected memories support reliable operation across typical commercial embedded environments.
• Extensive I/O and interfaces: Up to 107 GPIOs and multiple UART/SPI/I²C ports provide flexible connectivity for sensors, actuators and human-interface peripherals.

Why Choose A34M420YL?

The A34M420YL positions itself as a performance-oriented, motor-control–focused MCU that pairs Cortex‑M4F compute capability with a purpose-built peripheral set: multi-phase PWM, multi-block ADCs, robust DMA and dual-bank flash for field updates. This combination delivers a compact, integrated solution for designers targeting inverter drives, pumps, fans and home-appliance control systems.

Designed for scalable embedded systems, the device’s large on-chip memories, ECC and flexible clocking simplify software development and firmware management while the wide I/O count and peripheral mix reduce bill-of-materials and integration effort for system engineers.

Request a quote or submit a product inquiry to receive pricing, lead-time and availability information for the A34M420YL.