A96G166LU

The A96G166LU is an advanced CMOS 8-bit microcontroller based on the M8051 core, delivering up to 16 MHz operation with 16 Kbytes of on-chip Flash and 0.75 Kbytes of RAM. It integrates a broad set of analog and digital peripherals—12-bit ADC, multiple timers, USART and I2C interfaces, on-chip clocking and reset circuitry—making it well suited for compact, low-power embedded applications.

Packaged in a compact 24-pin QFN (4×4‑0.5 mm) and supporting a wide 1.8–5.5 V supply range and extended temperature operation, the A96G166LU targets designs requiring integration, flexible I/O and reliable system features in a small footprint.

Key Features

• Core – 8-bit M8051 CISC core with up to 16 MHz main-clock operation (minimum instruction time 125 ns at 16 MHz).
• Memory – 16 Kbytes on-chip FLASH with In-System Programming (ISP) and 30,000 cycle endurance; 0.75 Kbytes of RAM (256 bytes IRAM + 512 bytes XRAM).
• Analog – 12-bit A/D converter with 11 external input channels (package-specific), plus an internal reference input channel for sensor interfacing and accurate measurement.
• Timers & PWM – Basic interval timer (BIT), Watch Timer (WT), Window Watchdog Timer (WDT), one 8-bit timer and two 16-bit timers; programmable pulse generation and 16-bit complement PWM with dead-time control for motor or power control tasks.
• Interfaces & Connectivity – Dual USART (configurable as UART or SPI), I2C (1‑channel); flexible serial options for sensor buses, user interfaces and peripheral control.
• GPIO & Drivers – Up to 22 general-purpose I/O pins in the 24‑QFN package, including high‑current sink ports (4 high‑current ports / LED drivers) for direct drive of indicators and basic loads.
• System Reliability – On-chip POR, Low Voltage Reset (LVR), Low Voltage Indicator (LVI) with multi-level detect, and hardware CRC-16 for data integrity and robust boot/reset behavior.
• Clocking & Power – Internal and external oscillator support with internal RC oscillators (HSI/LSI), plus power‑saving STOP and IDLE modes to optimize battery‑powered applications.
• Operating Range & Package – Wide supply range 1.8–5.5 V, operating temperature from −40 °C to +85 °C, and a compact 24‑QFN (4×4‑0.5 mm) surface‑mount package for space‑constrained designs.

Typical Applications

• Home Appliances – Control user interfaces, timers and basic motor or actuator functions using the integrated timers, PWM and multiple I/O.
• Portable & Battery-Powered Devices – Low-voltage operation and power-saving STOP/IDLE modes help extend battery life while supporting sensor acquisition via the 12-bit ADC.
• Sensor and Measurement Modules – 12-bit ADC and internal reference channel provide high-resolution analog input for sensor interfacing and condition monitoring.
• Consumer Electronics Control – Dual USART/I2C and GPIO with high-current sink ports simplify user interface, LED driving and peripheral communication tasks.

Unique Advantages

• Highly integrated peripheral set: Combines ADC, multiple timers, PWM, CRC and serial interfaces to reduce BOM and simplify system design.
• Flexible power and clock options: Internal and external oscillator support plus wide 1.8–5.5 V supply range enable use across battery and line-powered designs.
• Compact package for space-constrained designs: 24‑QFN (4×4‑0.5 mm) delivers a small footprint while retaining 22 GPIOs and dedicated high-current ports.
• Robust system features: On-chip POR, multi-level LVR/LVI and Window WDT help improve system reliability and predictable reset behavior.
• In-System Programmable Flash: 16 Kbytes FLASH with ISP and 30,000 cycle endurance supports field updates and iterative development.

Why Choose A96G166LU?

The A96G166LU strikes a balance between compact form factor and extensive peripheral integration, making it a suitable choice for embedded designs that demand ADC accuracy, multiple timing resources and flexible serial connectivity. Its wide supply voltage range, multiple power-saving modes and robust reset/voltage supervision features support reliable operation across a variety of environments.

This device is well suited to engineers building low-power, space-conscious products that require on-chip analog measurement, PWM and communication peripherals. With on-chip Flash ISP and clear documentation, the A96G166LU supports iterative development and deployment cycles while helping minimize external component count.

Request a quote or submit an inquiry to discuss pricing, availability and how the A96G166LU can fit your next embedded design.