LLS1C333MELA

The LLS1C333MELA is an aluminum electrolytic capacitor in a snap‑in terminal, radial can package rated for 16 V and 33 mF capacitance. It is an 85°C‑rated, general‑purpose component designed for applications that require robust bulk capacitance and high ripple handling in a snap‑in form factor.

Engineered for long‑life operation under continuous ripple load, this part withstands 3000 hours of rated ripple current at 85°C and is RoHS compliant.

Key Features

• Capacitance & Voltage: 33 mF capacitance at a rated voltage of 16 V, with a capacitance tolerance of ±20% (measured at 120 Hz, 20°C).
• Snap‑in Radial Can Package: Snap‑in terminal mounting for secure board retention and reliable mechanical connection in through‑hole assemblies.
• High Ripple Endurance: Rated to withstand 3000 hours of rated ripple current at 85°C; frequency ripple current specifications include 5.49 A at 120 Hz and 6.314 A at 50 kHz.
• Operating Temperature Range: Specified for –40°C to +85°C operation.
• Leakage Current Specification: Leakage current meets I ≤ 3√(C×V) μA after 5 minutes' application of rated voltage at 20°C (C in μF, V in volts), per the datasheet standard.
• Dielectric Loss (tan δ): Maximum tan δ of 0.50 at 16 V (measured at 120 Hz, 20°C), providing a defined dielectric loss parameter for design verification.
• Polarized Device: Conventional polarized aluminum electrolytic construction for bulk energy storage and filtering in DC circuits.
• RoHS Compliant: Conforms to the RoHS directive (2011/65/EU, (EU)2015/863) for restricted substances.
• Physical Size: Nominal body dimensions approximately L: 5 cm × D: 2.5 cm for board‑level planning and layout.

Typical Applications

• General‑purpose power filtering: Bulk capacitance and ripple handling for smoothing and decoupling in power supplies and DC power rails.
• Industrial electronics: Board‑mounted energy storage and filtering in general‑purpose industrial control equipment.
• Power conversion modules: Input/output smoothing where snap‑in mounting and high ripple endurance are required.

Unique Advantages

• Long ripple endurance: Rated to withstand 3000 hours of rated ripple current at 85°C, supporting designs that require sustained ripple performance.
• High ripple current capability: Specified ripple current values at 120 Hz and 50 kHz allow designers to size parts against expected AC stress.
• Snap‑in mounting for reliability: Snap‑in terminals provide robust mechanical retention and simplified insertion for through‑hole assemblies.
• Clear electrical limits: Datasheet leakage current and tan δ limits allow straightforward verification against system requirements.
• Wide ambient range: –40°C to +85°C operating range supports a broad set of general‑purpose electronic environments.
• RoHS compliance: Conforms to current RoHS directives for restricted substances.

Why Choose LLS1C333MELA?

LLS1C333MELA delivers a combination of high bulk capacitance, defined dielectric loss, and documented ripple endurance in a snap‑in radial can package. Its 16 V rating and 33 mF capacitance make it suitable for designers seeking dependable bulk energy storage and ripple tolerance in general‑purpose electronic designs.

This part is well suited to projects that prioritize long‑term ripple performance and straightforward board mounting. Backed by datasheet specifications for leakage current, tan δ, and endurance, LLS1C333MELA provides verifiable performance for procurement and design validation.

If you would like pricing or availability, request a quote or submit an inquiry to receive detailed ordering information and lead‑time guidance for LLS1C333MELA.