LNC2G332MTEG

The LNC2G332MTEG is an aluminum electrolytic capacitor in Nichicon’s LNC series, configured as a stud bolt mount with screw terminals for secure power connections. It delivers 3.3 mF (3300 µF) at 400 V with construction optimized for high ripple current and compact installation.

Designed for industrial power electronics, this capacitor is targeted at inverter circuitry and motor-drive regenerative circuits where high ripple handling, long life, and a durable mounting solution are required. Key value points include high ripple-current capability, a 5000-hour endurance rating at 85°C, and RoHS compliance.

Key Features

• Core Electrical — Rated capacitance 3300 µF (3.3 mF) at 400 V with capacitance tolerance of −20% to +20%.
• Loss & Leakage — Specified tangent of loss angle (tan δ) of 0.2 measured at 20°C, 120 Hz, and a listed leakage current of 3440 µA.
• High Ripple Current — Low-frequency ripple current 14.9 A at 120 Hz and high-frequency ripple current 20.86 A at 100 kHz to support demanding AC and switching environments.
• Endurance & Temperature — Rated for 5000 hours of operation at 85°C and an operating temperature range of −40°C to +85°C.
• Mechanical & Mounting — Stud bolt mount (screw terminal type) in a radial can package; nominal size φ63.5 × 90 mm (D × L) for compact installation and robust electrical connections.
• Regulatory — Compliant with RoHS requirements.

Typical Applications

• Industrial Power Supplies: Suited for inverter circuitry in industrial power supplies where sustained ripple handling and long life are necessary.
• Motor Drives / AC Servomotors: Supports high-frequency regenerative voltage and the rapid charge–discharge profiles found in servo and drive systems.
• General Inverters: Designed to handle the ripple and switching stresses common to inverter topologies in industrial settings.
• High-Speed Charge–Discharge Systems: Appropriate for applications that demand reliable performance under frequent charge–discharge cycling.

Unique Advantages

• High Ripple Capability: Explicitly rated for 14.9 A at 120 Hz and 20.86 A at 100 kHz, enabling reliable performance in both low- and high-frequency switching environments.
• Compact, High-Performance LNC Series Design: Smaller-sized, higher ripple current construction compared to other series in the same family, allowing space-efficient designs without sacrificing ripple performance.
• Long Operational Life: 5000-hour endurance at 85°C supports extended field service life in industrial applications.
• Secure Electrical Connections: Stud bolt mount with screw terminals provides a robust mechanical and electrical interface for high-current systems.
• Wide Temperature Range: Rated for −40°C to +85°C to cover a broad range of industrial environmental conditions.
• RoHS Compliance: Meets RoHS directive requirements for environmental and regulatory assurance.

Why Choose LNC2G332MTEG?

The LNC2G332MTEG combines high capacitance (3300 µF) and a 400 V rating with engineered ripple-current capability and a stud-mount mechanical design to meet the demands of industrial power electronics. Its 5000-hour endurance at 85°C and specified performance parameters make it a reliable choice for inverter circuitry, motor-drive regenerative circuits, and other high-stress switching applications.

This part is appropriate for designers seeking a compact, high-ripple-capacity electrolytic capacitor with robust mounting and verified operating range, offering long-term stability and RoHS compliance for industrial deployments.

Request a quote or submit a sales inquiry to evaluate LNC2G332MTEG for your next power-electronics design and to receive pricing, lead-time, and ordering information.