LNC2H562MTEJ

The LNC2H562MTEJ is a screw-terminal aluminum electrolytic capacitor in a compact radial can package, rated 5600 µF at 500 V and designed for industrial power electronics. It targets inverter and servo drive power supplies where high ripple current, high-frequency regenerative voltages, and robust charge–discharge behavior are required.

Built for continuous operation in industrial environments, the capacitor delivers tested load life performance (5000 hours at 85°C) and is RoHS compliant, making it suitable for long-life power applications that need high ripple handling and compact mounting via stud/bolt terminals.

Key Features

• Capacitance & Voltage – 5.6 mF (5600 µF) nominal capacitance at a 500 V rated voltage, with a tolerance of –20% to +20%.
• High Ripple Current Capability – Rated ripple current of 26.4 A at 120 Hz and 36.96 A at 100 kHz supports heavy AC ripple and high-frequency regenerative loads.
• Thermal & Lifetime Performance – Operates over –40 °C to +85 °C with a load life of 5000 hours at 85 °C under rated ripple current.
• Package & Mounting – Radial can with screw terminals and stud/bolt mount configuration for secure installation in power racks and bus assemblies.
• High-Frequency & Charge–Discharge Endurance – Series-level design and testing include endurance for high-speed charge–discharge behavior and suitability for high-frequency regenerative voltages.
• Compliance – RoHS compliant (2011/65/EU, (EU)2015/863).

Typical Applications

• Industrial Inverter Power Supplies – Energy buffering and smoothing for inverter front ends and DC bus systems where high ripple current tolerance is required.
• AC Servo Motor Drives – Handles regenerative voltages and frequent charge–discharge cycles in servo and motion-control electronics.
• High-Frequency Regenerative Circuits – Suitable for applications with high-frequency switching and regenerative energy flow due to its high-frequency ripple capability.
• Power Conditioning Modules – Bulk energy storage and ripple suppression in industrial power-conditioning and motor-control assemblies.

Unique Advantages

• High ripple-current handling: Specified ripple currents of 26.4 A (120 Hz) and 36.96 A (100 kHz) reduce voltage sag on DC buses under heavy AC ripple.
• Tested long-term reliability: Load life specified at 5000 hours at 85 °C under rated ripple current, providing predictable end-of-life behavior for system design.
• Compact, screw-terminal construction: Radial can with stud/bolt mount and screw terminals simplifies secure mechanical and electrical connections in power assemblies.
• Designed for high-frequency regenerative use: Series-level suitability for regenerative voltages and high-speed charge–discharge makes it appropriate for servo and inverter applications.
• Wide operating temperature range: –40 °C to +85 °C supports a broad set of industrial environments without derating outside specified limits.
• RoHS compliant: Meets EU RoHS requirements for restricted substances, aiding regulatory alignment in manufactured equipment.

Why Choose LNC2H562MTEJ?

The LNC2H562MTEJ positions itself as a robust energy-storage component for industrial power electronics that need compact form factor combined with high ripple-current capability and verified load-life performance. Its screw-terminal stud mounting and radial can package make it straightforward to integrate into inverter, servo drive, and power-conditioning designs.

Engineers specifying this capacitor benefit from clear electrical and environmental ratings, endurance testing for high-frequency charge–discharge behavior, and manufacturer-backed compliance, making it a practical choice for designs that demand reliable DC-bus energy buffering and regenerative handling over long service intervals.

If you need pricing, lead-time or technical information for design evaluation, request a quote or submit an inquiry and our team will provide the details and support you require.