LNC2V152MSEFBN
| Part Description |
1500 µF 350 V ±20% Aluminum Electrolytic Capacitor, Screw Terminal |
|---|---|
| Quantity | 1,246 Available (as of November 3, 2026) |
| Product Category | Aluminum Electrolytic Capacitors |
|---|---|
| Part Series | LNC |
| Manufacturer | Nichicon |
| Manufacturing Status | Mass Production |
| Manufacturer Standard Lead Time | Contact Us |
| Datasheet |
Specifications & Environmental
| Applications | General Purpose | Capacitance | 1.5 mF | ECCN | EAR99 | ||
|---|---|---|---|---|---|---|---|
| ESR | N/A | Height Seated (Max) | 6.8 cm | HTS Code | 8532.22.0055 | ||
| Impedance | N/A | Lead Spacing | N/A | Lifetime @ Temp | 5000 h @ 85°C | ||
| Moisture Sensitivity Level | N/A | Mounting Method | Screw Terminal | Operating Temperature | -40°C - 85°C | ||
| Package / Case | Radial, Can - Screw Terminals | Polarization | Polar | Ratings | N/A | ||
| REACH Compliance | REACH Affected | Ripple Current High Frequency | 13.02 A @ 100 kHz | Ripple Current Low Frequency | 9.3 A @ 120 Hz | ||
| RoHS Compliance | Compliant | Size / Dimension | 65 x 51 mm | Surface Mount Land Size | N/A | ||
| Tolerance | -20%~20% | Voltage | 350 V |
Overview of LNC2V152MSEFBN – Screw Terminal Aluminum Electrolytic Capacitor, 1500 µF, 350 V
The LNC2V152MSEFBN is an aluminum electrolytic capacitor in a screw-terminal radial can designed for high-voltage power electronics. It delivers 1500 µF at a 350 V rating and is optimized for applications that require high ripple-current handling and robust charge–discharge performance.
Part of Nichicon’s LNC series, this capacitor is targeted at industrial power supplies, inverter circuitry and regenerative drive systems where compact size, long life and high-frequency ripple capability are required. It is RoHS compliant and available in mass production packaging.
Key Features
- Capacitance & Voltage — 1.5 mF (1500 µF) rated at 350 V with capacitance tolerance of −20% to +20% (120 Hz, 20°C).
- Ripple Current Performance — Low-frequency ripple current 9.3 A at 120 Hz and high-frequency ripple current 13.02 A at 100 kHz for demanding power applications.
- Loss Characteristics (tan δ) — tan δ = 0.2 measured at 20°C, 120 Hz, providing defined dissipation behavior for design verification.
- Leakage Current — Specified leakage current of 2170 µA, with series guidance on leakage limits after voltage application per datasheet procedures.
- Endurance & Reliability — Load-life rated for 5000 hours at 85°C with defined limits on capacitance change, tan δ and leakage after test conditions.
- Wide Operating Temperature — Specified for −40°C to +85°C operation to accommodate industrial environments.
- Mechanical & Mounting — Screw terminal radial can package (φ51 × 65L) for secure electrical and mechanical connection; packaging type: cardboard packing.
- Electrical Integrity — Insulation resistance requirement and voltage proof testing in the series specifications (insulation resistance >100 MΩ at DC 500 V; AC 2500 V 1 minute between terminal and bracket).
- Compliance — RoHS compliant.
Typical Applications
- Industrial Power Supplies — Bulk and DC-link filtering for inverter front-ends that require sustained ripple handling and high-voltage capacitance.
- AC Servomotor Drives — Energy smoothing and handling of regenerative voltages in servo and motion-control drive systems.
- Inverter and Regenerative Systems — DC-bus support in inverter stages where high-frequency ripple and rapid charge–discharge cycles occur.
- High-Frequency Switching Circuits — Suitable where high-frequency ripple current capability and robust charge–discharge endurance are required.
Unique Advantages
- High ripple-current capability: Specified 9.3 A at 120 Hz and 13.02 A at 100 kHz, enabling reliable performance under heavy AC ripple loads.
- Compact, screw-terminal construction: Radial can with screw terminals provides a secure connection and a smaller footprint compared to earlier LNX/LNK series designs from the same family.
- Long operational life: 5000-hour rated life at 85°C under rated ripple conditions helps ensure longevity in continuous-duty industrial systems.
- Designed for high-speed charge–discharge: Engineered to cope with rapid charge–discharge cycles common in inverter and regenerative applications.
- Tested electrical robustness: Series specifications include insulation resistance and dielectric withstand criteria to support reliable system integration.
- Regulatory compliance: RoHS compliant for use in regulated manufacturing environments.
Why Choose LNC2V152MSEFBN?
LNC2V152MSEFBN is positioned for designers who need a high-voltage electrolytic capacitor that balances high ripple-current capability, compact screw-terminal mounting and long life at elevated temperature. Its 1500 µF / 350 V rating, defined tan δ, and endurance characteristics make it suitable for inverter, servo and industrial power applications where repeated charge–discharge and regenerative events occur.
Available in mass-production quantities and supplied in cardboard packing, this Nichicon LNC-series capacitor provides a verifiable specification set for engineers specifying DC-link and bulk energy storage components in industrial power electronics.
Request a quote or submit an inquiry to our sales team to discuss availability, lead times and volume pricing for the LNC2V152MSEFBN.
Date Founded: 1950
Headquarters: Nakagyo, Kyoto, Japan
Employees: 5,000+
Revenue: $1.2 Billion
Certifications and Memberships: ISO9001:2015, IATF16949:2016