LNR2D333MSE

The LNR2D333MSE from Nichicon is a screw‑terminal aluminum electrolytic capacitor in the LNR series, specified for 200 V systems and 33,000 µF nominal capacitance. Its screw‑terminal radial can package and high ripple current ratings make it suitable for general‑purpose power applications that require substantial bulk capacitance and reliable DC bias handling.

Key Features

• High capacitance: 33,000 µF (33 mF) nominal capacitance for bulk energy storage and smoothing in high‑energy circuits.
• 200 V rated voltage: Designed for 200 V systems with a capacitance tolerance of ±20% at 120 Hz, 20°C.
• Robust ripple current capability: 19.5 A at 120 Hz (low frequency) and 23.4 A at 100 kHz (high frequency) to support heavy ripple and filtering loads.
• Screw‑terminal radial can package: φ90 × 170 L size with screw terminals and standard three‑leg mounting bracket for secure mechanical and electrical connections.
• Endurance at elevated temperature: 5,000 hours at 85°C with post‑test limits of capacitance change within ±15%, tan δ ≤ 175% of initial, and leakage current not greater than initial specified value.
• Leakage and loss characteristics: Specified leakage current 5,000 µA and tan δ 0.15 (measurement conditions as provided in datasheet).
• Operating temperature range: –25°C to +85°C for the 160–250 V rated range (series specification).
• RoHS compliant: Meets RoHS environmental requirements; supplied in cardboard packing and available in mass production.
• Marking and sleeve: Printed with black lettering on a light blue sleeve for clear identification.

Typical Applications

• General‑purpose power systems: Bulk energy storage and smoothing in systems that require a 200 V, high‑capacitance electrolytic capacitor.
• Power supply filtering: Use where high ripple current handling (19.5 A @120 Hz / 23.4 A @100 kHz) is needed to reduce voltage ripple.
• Industrial and commercial electronics: Systems that demand long endurance at elevated temperature—rated 5,000 hours at 85°C—benefit from predictable post‑endurance characteristics.

Unique Advantages

• Substantial bulk capacitance: 33,000 µF provides significant energy storage to support DC bus stabilization and long‑time smoothing without adding many parallel parts.
• High voltage capability: 200 V rating addresses higher‑voltage power rails while maintaining a large capacitance value.
• High ripple tolerance: Elevated ripple current ratings at both low and high frequencies reduce the need for multiple capacitors to handle dynamic loads.
• Mechanically secure termination: Screw terminals and standard three‑leg brackets (for φ51 and larger bodies) enable robust mounting and reliable connections for heavy current paths.
• Durability under heat: Specified 5,000‑hour endurance at 85°C with defined limits on capacitance, tan δ and leakage current supports long‑term design planning.
• Compliance and production readiness: RoHS compliant and listed as mass production status for procurement and volume deployment.

Why Choose LNR2D333MSE?

The LNR2D333MSE combines very high capacitance with a 200 V rating and screw‑terminal connectivity to address demanding general‑purpose power applications that require bulk energy storage, robust ripple handling and secure mechanical mounting. Its defined endurance at 85°C and manufacturer‑published post‑test limits provide predictable behavior over long operating periods.

This part is suited to engineers and procurement teams specifying high‑capacitance, high‑voltage aluminum electrolytic capacitors for industrial and commercial power systems where long life, clear identification and RoHS compliance are required.

For pricing, availability and to request a quote for LNR2D333MSE, please contact sales to submit your requirements and obtain lead‑time and ordering information.