UCM1J361MNJ1MS

The UCM1J361MNJ1MS is a chip-type, low-impedance aluminum electrolytic capacitor in a surface-mount radial can package. It delivers 360 µF at 63 V in a compact φ12.5 × 13.5 mm form factor designed for automated assembly with embossed carrier taping.

Targeted at automotive electronics, the UCM series combines AEC‑Q200 qualification, wide operating temperature range (−55°C to +105°C) and long endurance (5000 hours at 105°C) to address elevated-temperature, high-ripple environments.

Key Features

• Capacitance & Rated Voltage — 360 µF nominal capacitance with tolerance −20% to +20% and a rated voltage of 63 V for bulk energy storage in compact designs.
• Chip-Type, Low Impedance Construction — Chip-type, low-impedance design with a specified tanδ (DF) of 0.08 measured at 20°C, 120 Hz, for improved AC performance.
• Ripple Current Capability — Low-frequency ripple current 625 mA at 120 Hz and high-frequency ripple current 1.25 A at 10 kHz to support filtering and decoupling under varying load spectra.
• Leakage Current — Specified leakage current of 226.8 µA providing predictable bias behavior after rated voltage application.
• High-Temperature Endurance — Rated for 5000 hours at 105°C when the rated voltage is applied, supporting long-term operation in elevated-temperature environments.
• Wide Temperature Range — Operates from −55°C to +105°C to meet demanding ambient conditions.
• AEC‑Q200 Qualified & RoHS Compliant — Meets AEC‑Q200 qualification requirements and is RoHS compliant for regulated manufacturing environments.
• Surface-Mount Package & Automated Assembly — Radial can SMD package (φ12.5 × 13.5L) supplied in embossed carrier taping; recommended surface-mount land size L: 1.28 × W: 1.28 cm for PCB layout.

Typical Applications

• Automotive electronic modules — Bulk capacitance and decoupling in vehicle electronic control modules where AEC‑Q200 qualification and elevated-temperature endurance are required.
• Power supply filtering and decoupling — Handling of both low- and high-frequency ripple (625 mA @120 Hz, 1.25 A @10 kHz) for stable DC rails in automotive systems.
• Vehicle power electronics and DC‑DC converters — Energy storage and ripple suppression in compact surface-mount form for onboard power systems operating up to 105°C.

Unique Advantages

• High-temperature endurance: 5000 hours at 105°C provides predictable life performance in elevated-temperature applications.
• Dual-frequency ripple capability: Specified ripple ratings at 120 Hz and 10 kHz enable designers to address both mains-frequency and switching-frequency ripple without guesswork.
• AEC‑Q200 qualification: Designed to meet automotive-grade requirements for passive components, supporting use in automotive supply chains.
• Compact SMD form factor for automated assembly: Embossed carrier taping and a chip-type SMD can simplify pick-and-place and high-volume PCB assembly.
• Low dissipation factor: tanδ of 0.08 (20°C, 120 Hz) supports lower AC loss in high-frequency and thermal-stress conditions.
• Regulatory compliance: RoHS compliance supports production in regulated markets and reduces material-restriction concerns.

Why Choose UCM1J361MNJ1MS?

UCM1J361MNJ1MS positions itself as an automotive-capable surface-mount aluminum electrolytic solution that balances bulk capacitance, ripple handling and elevated-temperature endurance in a compact chip-type can. Its specified performance (360 µF, 63 V), AEC‑Q200 qualification and 5000‑hour life at 105°C make it suitable for designs that require sustained operation under thermal and electrical stress.

This part is appropriate for engineers specifying capacitors for vehicle power electronics, onboard DC‑DC conversion and electronic control modules where predictable leakage, dissipation factor and ripple performance are needed alongside automated assembly compatibility.

To request pricing, check availability, or submit a quotation request for UCM1J361MNJ1MS, please contact our sales team or submit an inquiry for a formal quote and lead-time information.