EN25E10A-104GIP(2AQ)

The EN25E10A-104GIP(2AQ) is a 1 Megabit serial NOR Flash memory device with a uniform 4 Kbyte sector architecture and high-performance SPI/dual-output interface. It is optimized for embedded code and non-volatile data storage where fast read performance, low power, and robust program/erase capabilities are required.

Built for industrial environments, the device supports up to 104 MHz standard SPI operation (equivalent 208 MHz for dual output), wide supply voltage operation and hardware/software write protection to help secure firmware and configuration data.

Key Features

• Memory Capacity & Organization – 1 Mbit (128 K-byte) organized as 128K × 8 with 256-byte programmable pages and 512 pages total.
• High-Speed SPI Interface – SPI compatible serial interface supporting Mode 0 and Mode 3 with up to 104 MHz clock for Standard SPI and equivalent 208 MHz for Dual Output.
• Sector & Block Architecture – Uniform sector layout with 32 × 4-Kbyte sectors, 4 × 32-Kbyte blocks and 2 × 64-Kbyte blocks; any sector or block can be erased individually.
• Program / Erase Performance – Page program typical time 0.6 ms; sector erase typical 50 ms; 32 KB block erase 150 ms typical; 64 KB block erase 300 ms typical; chip erase typical 0.7 s.
• Reliability & Retention – Minimum 100 K program/erase cycles per sector/block and typical data retention of 20 years.
• Power – Low power operation with typical active current 5 mA and typical power-down current 1 μA. Full supply range 2.3–3.6 V (typical 2.5 V).
• Protection – Software write protection and WP# hardware pin to enable/disable write protection for all or portions of memory.
• Package & Temperature Range – Available in 8‑lead SOP (150 mil) and 8‑contact USON (2 × 3 × 0.45 mm) surface-mount packages; industrial operating temperature range −40 °C to 85 °C.
• Low-Latency Read – Fast access characteristics with an access time of 8 ns for quick code/data fetches in embedded systems.
• Standards & Compliance – Serial interface architecture compatible with standard and dual SPI instruction sets; RoHS-compliant packages.

Typical Applications

• Embedded Systems & Microcontroller Firmware – Store boot code and firmware images for quick, reliable code execution and field upgrades.
• Industrial Control & Instrumentation – Non-volatile storage for configuration data and system parameters across −40 °C to 85 °C operating range.
• Consumer & Portable Electronics – Compact, low-power serial Flash for storing resources, settings, and small file systems.
• System Configuration & Security – Hardware and software write protection to safeguard critical regions of memory.

Unique Advantages

• Fast SPI Throughput: High clock rate (104 MHz standard, equivalent 208 MHz dual) enables accelerated code fetch and data transfer without changing pin count.
• Granular Erase Control: Uniform 4 KB sectors and multiple block sizes let designers erase only the regions they need, reducing wear and shortening maintenance cycles.
• Robust Endurance & Retention: Minimum 100 K P/E cycles and 20-year data retention provide long-term reliability for firmware and configuration storage.
• Low-Power Standby: 1 μA typical power-down current helps minimize energy draw in battery-powered and always-on systems.
• Industrial-Grade Packaging: Surface-mount SOP and USON packages and an extended temperature range support compact designs for industrial applications.
• Hardware + Software Protection: WP# pin plus software protection options allow flexible security schemes for critical memory regions.

Why Choose EN25E10A-104GIP(2AQ)?

The EN25E10A-104GIP(2AQ) combines a compact 1 Mbit SPI NOR architecture with high-speed read performance, low-power operation, and industrial temperature capability—making it suited for embedded designs that require reliable non-volatile storage for firmware, configuration, and small datasets. Its uniform sector layout, fast program/erase characteristics, and dual protection mechanisms deliver design flexibility and robust data integrity over long lifecycles.

This device is a practical choice for engineers building compact, power-conscious systems that demand durable flash storage and straightforward integration with standard SPI interfaces and existing embedded toolchains.

If you would like pricing, availability or to request a quote for EN25E10A-104GIP(2AQ), please submit an inquiry or request a formal quote to confirm lead times and order details.