EN25S80B-104GIP(2S)

The EN25S80B-104GIP(2S) is an 8.389 Mbit non-volatile SPI NOR Flash memory organized as 1M × 8 (1024 KByte). It implements SPI NOR Flash architecture with page and sector management for code and data storage in industrial embedded systems.

Built for industrial operating conditions and surface-mount assembly, this device combines high-speed serial read capability with programmable page programming and sector/block erase for flexible firmware and data management.

Key Features

• Memory and Organization — 8.389 Mbit total capacity organized as 1M × 8 (1024 KByte), 4096 pages with 256 bytes per programmable page.
• Serial SPI Architecture — SPI NOR Flash technology supporting Standard, Dual and Quad SPI modes with common SPI signals (CLK, CS#, DI/DQ0, DO/DQ1, WP#, HOLD#).
• High-speed Read — Fast read operation with support for up to 104 MHz clock frequency in fast/dual modes to accelerate code and data fetches.
• Program & Erase Performance — Typical page program time 0.5 ms; sector erase (4 Kbyte) typical 40 ms; half-block and block erase times and full chip erase timings are provided for flexible memory management.
• Reliability & Data Retention — Minimum 100K program/erase cycles per sector and typical data retention of 20 years, suitable for long-term firmware storage.
• Low Power Operation — Typical active current around 4.5 mA and power-down current as low as 0.1 μA to support low-power embedded designs.
• Industrial Grade & Temperature Range — Grade: Industrial; specified operating temperature range −40 °C to 85 °C for deployment in industrial environments.
• Package & Mounting — Surface-mount 8-pin SOP 150 mil body width for compact board-level integration; RoHS-compliant Pb‑free packaging.
• Security & Protection — Uniform sector architecture (4 Kbyte sectors) with software and hardware write protection mechanisms to guard code and data regions.
• Access Characteristics — Fast access behavior with an access time value provided for system timing considerations.

Typical Applications

• Industrial Embedded Systems — Firmware and parameter storage for controllers and industrial equipment operating across −40 °C to 85 °C.
• Firmware and Boot Storage — Non-volatile storage of boot code, firmware updates and patchable program modules using sector/block erase and write-protect features.
• Compact Consumer and Utility Devices — On-board program and data storage where a small SOP-8 footprint and low-power standby are required.

Unique Advantages

• Flexible SPI Modes — Support for Standard, Dual and Quad SPI provides scalable throughput options without changing package or primary interface.
• Granular Memory Management — Uniform 4 Kbyte sectors and multiple block sizes allow targeted erase/program operations to reduce wear and update scope.
• Industrial-ready — Industrial grade temperature range and RoHS-compliant packaging make the device suitable for production deployments in demanding environments.
• Long-Term Data Retention and Endurance — Designed for up to 100K program/erase cycles and about 20 years of data retention to support product lifecycles and field updates.
• Low Power Footprint — Typical active and ultra-low power-down currents support energy-conscious applications and battery-powered systems.

Why Choose EN25S80B-104GIP(2S)?

The EN25S80B-104GIP(2S) positions itself as a reliable, compact SPI NOR Flash device for industrial embedded designs that require modest capacity, robust program/erase endurance and flexible SPI performance up to 104 MHz. Its uniform sector architecture, software/hardware protection features and low-power modes simplify firmware management and field updates.

Choose this device when you need a surface-mount, industrial-grade non-volatile memory solution that balances speed, endurance and manageability for firmware storage, boot code and data retention across a wide operating temperature range.

Request a quote or submit an RFQ to get pricing and availability for EN25S80B-104GIP(2S).