A96G150KN

The A96G150KN from Abov is an advanced CMOS 8-bit microcontroller based on an M8051-compatible core (2-clock per cycle) delivering up to a 16 MHz main clock. It combines a highly integrated peripheral set, flexible memory options and broad voltage and temperature operating ranges for a wide range of embedded control applications.

Designed for compact, cost-effective system designs, the A96G150KN integrates analog converters, multiple timers and communication interfaces alongside on-chip power management and display drivers to simplify BOM and accelerate development.

Key Features

• Core M8051 8-bit core (8051 compatible) with 2-clock-per-cycle operation and a 125 ns minimum instruction execution time at a 16 MHz main clock.
• Memory 64 Kbytes on-chip Flash with in-system programming and 30,000 cycle endurance, plus 2 Kbytes EEPROM (300,000 cycle endurance, 10-year retention) and 2.5 Kbytes total RAM (256 bytes IRAM + 2,304 bytes XRAM).
• Power and Voltage Wide supply range of 1.8–5.5 V with on-chip POR, low-voltage reset (16-level detection) and low-voltage indicator (13-level detection) for robust power monitoring.
• Timers and PWM Multiple timers including 8-bit and 16-bit timers, Watchdog Timer (WDT), Watch Timer (WT) with selectable intervals, and programmable pulse/PWM channels for precise timing and control.
• Analog 12-bit A/D converter with up to 13 input channels (32-LQFP / 28-TSSOP variants), suitable for multi-channel sensor interfacing and precise analog measurements.
• Communications Integrated communication peripherals including USART and USI (supporting USART, SPI and I2C modes across available channels) for flexible serial connectivity.
• Display and GPIO LCD driver supporting up to 24 segments × 8 commons with selectable duty and contrast control; up to 30 general-purpose I/O pins on the 32-LQFP package and high-sink current ports for direct LED/buzzer driving.
• System Reliability CRC-16 hardware support, power-on reset, internal RC oscillators, and watchdog/interval timers to support system integrity and fault recovery.
• Low Power Modes STOP and IDLE power-down modes plus internal sub-clock options (LSI) for reduced power consumption in standby or timing-only operation.
• Package and Environmental Available in a 32-LQFP (7×7 mm, 0.8 mm pitch) surface-mount package with an operating temperature range of −40 to +85 °C.

Typical Applications

• Home Appliances Control and user-interface tasks using built-in timers, LCD driver and 12-bit ADC channels for sensor and user input handling.
• Consumer Electronics Embedded control for small appliances and accessories where compact Flash, EEPROM and integrated communication interfaces simplify design.
• Industrial Control General-purpose embedded control requiring reliable power monitoring, multiple timers, and robust I/O count across a wide supply range and temperature window.

Unique Advantages

• Highly integrated memory mix: 64 KB Flash plus 2 KB EEPROM and 2.5 KB RAM provide a flexible footprint for code, calibration data and runtime variables, reducing external memory needs.
• Broad analog and display support: 12-bit A/D and an integrated LCD driver allow direct interfacing to sensors and user displays without additional controllers.
• Flexible communication options: USART and USI peripherals (USART/SPI/I2C modes) enable multiple serial topologies for sensors, peripherals and system interconnectivity.
• Robust power management: Wide 1.8–5.5 V supply range, POR, LVR/LVI and selectable low-power modes support reliable operation across varying power conditions.
• Design-friendly package: 32-LQFP surface-mount package with 30 GPIOs and dedicated high-current ports makes board layout and peripheral connections straightforward.

Why Choose A96G150KN?

The A96G150KN delivers a balanced combination of classic M8051 compatibility, ample on-chip memory, precise 12-bit analog conversion and a comprehensive peripheral set for embedded control designs. Its integrated display driver, multiple timers and communication interfaces reduce external component count and simplify hardware design.

This device is well suited to designers seeking a compact, reliable microcontroller for consumer, home appliance and industrial applications that require solid analog performance, flexible I/O and dependable power management over a wide supply and temperature range.

Request a quote or submit a product inquiry to evaluate the A96G150KN for your next embedded design project.