AT91SAM9XE512B-QU

The AT91SAM9XE512B-QU is a 32-bit microprocessor based on the ARM926EJ-S core running at 180 MHz in a 208‑pin PQFP (28×28 mm) surface-mount package. Designed for industrial embedded systems, it combines high-performance processor features with on-chip memory, peripheral integration and deterministic system control.

Its architecture and peripheral set target applications that require Ethernet and USB connectivity, display and image capture interfaces, external memory support, and robust system monitoring to meet industrial temperature and reliability demands.

Key Features

• Core & Performance ARM926EJ-S CPU at 180 MHz with ARM Thumb and DSP instruction extensions, MMU, EmbeddedICE debug support, and reported 200 MIPS performance at 180 MHz. Includes 8 KB data cache, 16 KB instruction cache and a write buffer for improved code and data throughput.
• On-chip Memories Internal memory configuration for the SAM9XE512 variant includes 32 KB ROM, 32 KB SRAM and 512 KB internal high-speed Flash organized in 1024 pages of 512 bytes. Flash supports 128-bit wide access and fast read/program characteristics.
• Enhanced Flash Support Enhanced Embedded Flash Controller (EEFC) provides a 32-bit internal bus interface, page programming and erase controls, page lock capabilities, and a Flash security bit. Flash endurance and retention metrics include 10,000 write cycles and 10 years data retention as documented for the series.
• Memory & External Bus External Bus Interface (EBI) supports SDRAM and static memories, ECC-enabled NAND Flash and CompactFlash devices. Built-in SDRAM and SRAM controller support enables flexible external memory architectures.
• Connectivity & Interfaces Integrated Ethernet MAC supporting 10/100 Base‑T with MII or RMII interface and 128-byte FIFOs with dedicated DMA channels. USB 2.0 Full-Speed device port and a USB Host single port in the 208-pin PQFP package. Additional interfaces include EBI/EMI, SPI, TWI, synchronous serial controller and six UARTs.
• Display & Image Support Display interface controllers for LCD and touchscreen use are included, and the series provides an Image Sensor Interface (ISI) compatible with ITU‑R BT.601/656 for frame capture and external image sensors.
• System Reliability & Control Integrated reset controller, brownout detector, watchdog running from an internal RC oscillator, and built-in lock bits and security features to protect firmware and support controlled power-on sequencing.
• Package & Environmental 208‑pin PQFP (28×28 mm) surface‑mount package rated for industrial grade operation and an operating temperature range of −40 °C to 85 °C.

Typical Applications

• Industrial Automation — Embedded controllers and PLC front-ends leveraging Ethernet connectivity, external memory support and deterministic watchdog/reset functions for reliable operation.
• Human–Machine Interfaces (HMI) — LCD and touchscreen controller support combined with on‑chip Flash and SRAM for compact UI firmware and local graphics control.
• Networking and Communication Appliances — 10/100 Mbps Ethernet MAC and USB host/device capability suitable for networked gateways, protocol bridges and field connectivity modules.
• Imaging and Sensor Gateways — Image Sensor Interface (ISI) and SD/MMC host interface for camera capture, preprocessing and storage in embedded vision or monitoring applications.

Unique Advantages

• Highly integrated connectivity: On‑chip Ethernet MAC and USB host/device ports reduce external components and simplify board-level design for networked products.
• On-chip nonvolatile storage: 512 KB internal high‑speed Flash with EEFC and security/lock features enables in‑system programming and protected firmware deployment.
• Flexible memory subsystem: 32 KB SRAM plus an External Bus Interface supporting SDRAM, static memory and NAND Flash allows scalable memory configurations for varied application needs.
• Industrial readiness: Surface-mount 208‑pin PQFP package and an operating range of −40 °C to 85 °C suit industrial embedded designs.
• Built-in system monitoring: Reset controller, brownout detector and watchdog provide foundational reliability features for unattended or critical systems.
• Developer-friendly debug and protection: EmbeddedICE debug support, MMU and flash security bits facilitate development, debugging and firmware protection.

Why Choose AT91SAM9XE512B-QU?

The AT91SAM9XE512B-QU positions itself as a balanced, highly integrated microprocessor solution for industrial embedded designs that need Ethernet and USB connectivity, robust system monitoring and flexible memory architectures. With an ARM926EJ-S core, integrated caches and on‑chip Flash, it provides deterministic performance and compact system integration in a 208‑pin PQFP package.

Designs that require image capture, display interfaces, or a mix of high‑level peripherals (UARTs, SPI, TWI) alongside external memory options will benefit from the SAM9XE512 feature set and reliability features such as brownout detection, watchdog and flash protection.

Request a quote or submit an inquiry to receive pricing and availability information for the AT91SAM9XE512B-QU.