UHW1V561MPD
| Part Description |
560 µF 35 V ±20% Aluminum Electrolytic Capacitor, Radial Lead |
|---|---|
| Quantity | 685 Available (as of November 3, 2026) |
| Product Category | Aluminum Electrolytic Capacitors |
|---|---|
| Part Series | UHW |
| Manufacturer | Nichicon |
| Manufacturing Status | Mass Production |
| Manufacturer Standard Lead Time | Contact Us |
| Datasheet |
Specifications & Environmental
| Applications | General Purpose | Capacitance | 560 µF | ECCN | EAR99 | ||
|---|---|---|---|---|---|---|---|
| ESR | N/A | Height Seated (Max) | 2.2 cm | HTS Code | 8532.22.0020 | ||
| Impedance | 60 mOhm | Lead Spacing | 5 mm | Lifetime @ Temp | 10000 h @ 105°C | ||
| Moisture Sensitivity Level | N/A | Mounting Method | Radial Lead | Operating Temperature | -40°C - 105°C | ||
| Package / Case | Radial, Can | Polarization | Polar | Ratings | N/A | ||
| REACH Compliance | REACH Affected | Ripple Current High Frequency | 2.5 A @ 10 kHz | Ripple Current Low Frequency | 1.25 A @ 120 Hz | ||
| RoHS Compliance | Compliant | Size / Dimension | 20 x 10 mm | Surface Mount Land Size | N/A | ||
| Tolerance | -20%~20% | Voltage | 35 V |
Overview of UHW1V561MPD – 560 µF, 35 V Radial Lead Aluminum Electrolytic Capacitor
The UHW1V561MPD is a miniature, high-reliability aluminum electrolytic capacitor in a radial-lead can designed for general-purpose power applications. It delivers 560 µF at 35 V with low impedance and elevated ripple-current capability for compact power filtering, decoupling and energy-storage roles.
Engineered for extended operation across a wide temperature range (−40°C to +105°C) and rated for 10,000 hours at 105°C, this RoHS-compliant component balances small case size (φ10 × 20 mm) with measurable electrical performance metrics such as 60 mΩ impedance and a 1.25–2.5 A ripple-current capability depending on frequency.
Key Features
- Capacitance & Voltage — 560 µF nominal capacitance with a rated voltage of 35 V and a tolerance of −20% to +20%.
- High Ripple Current — Low-frequency ripple current 1.25 A (120 Hz) and high-frequency ripple current 2.5 A (10 kHz), supported by frequency coefficients from the UHW series datasheet (e.g., 0.94 at 10 kHz for 220–560 µF).
- Low Impedance & Loss — Typical impedance 60 mΩ and tangent of loss angle (tan δ) 0.11 measured at 20°C, 120 Hz, enabling improved performance in high-frequency circuits.
- Long Endurance — Rated lifetime of 10,000 hours at 105°C under rated DC bias plus ripple, with post-test limits on capacitance, tan δ and leakage current defined by the series specifications.
- Wide Temperature Range — Operates from −40°C to +105°C to accommodate demanding thermal environments.
- Compact Radial Package — φ10 × 20 mm aluminum can, radial lead mounting with 5.0 mm lead spacing (±0.5 mm), suitable for through-hole assemblies.
- Leakage & Polarization — Polarized device with leakage current specified at 196 µA; suitable for designs that require defined leakage performance.
- Packaging Options — Available in bulk (no terminal forming) or bag packing for flexible assembly and procurement.
- Environmental Compliance — RoHS compliant.
Typical Applications
- Power supply filtering — Bulk smoothing and ripple reduction in switching and linear power supplies that benefit from high ripple-current capability and low impedance.
- Decoupling and bulk energy storage — Local energy reservoir for voltage regulation and transient load support in general-purpose electronic systems.
- Industrial and control electronics — Filtering and energy storage in control modules and power subsystems that require long life at elevated temperatures.
Unique Advantages
- Compact size with high ripple capacity — φ10 × 20 mm can delivers 1.25 A to 2.5 A ripple performance, enabling smaller board area for equivalent filtering capability.
- Measured low impedance — 60 mΩ impedance combined with tan δ of 0.11 at 120 Hz supports better high-frequency behavior compared with higher-impedance alternatives.
- Extended high-temperature life — 10,000 hours at 105°C provides predictable long-term performance for thermally demanding designs.
- Through-hole radial mounting — 5.0 mm lead spacing (±0.5 mm) and standard radial can form factor simplify mechanical integration and replacement.
- Clear specification set — Defined leakage current (196 µA), tolerance, ripple ratings and frequency coefficients allow straightforward engineering trade-offs during design.
- RoHS compliant supply options — Available in bulk or bag packing for production flexibility while meeting environmental directives.
Why Choose UHW1V561MPD?
The UHW1V561MPD pairs a compact radial-can footprint with quantifiable electrical performance—low impedance, controlled loss (tan δ), and substantial ripple-current capability—making it a practical choice for engineers needing reliable power filtering and energy storage in space-constrained assemblies. Its 10,000-hour endurance at 105°C and RoHS compliance make it suitable for sustained operation in demanding ambient conditions.
This part is well suited for designers of general-purpose power electronics, industrial control equipment and other systems that require a proven electrolytic capacitor with documented ripple, leakage and lifetime characteristics.
Request a quote or submit a product inquiry to receive pricing, availability and ordering information for the UHW1V561MPD.
Date Founded: 1950
Headquarters: Nakagyo, Kyoto, Japan
Employees: 5,000+
Revenue: $1.2 Billion
Certifications and Memberships: ISO9001:2015, IATF16949:2016