GYB1H220MCQ1GS

The GYB1H220MCQ1GS is a conductive polymer hybrid aluminum electrolytic capacitor in a surface-mount can package, offering 22 µF capacitance at a 50 V rating. It is built for high-reliability board‑level power applications that demand low ESR, high ripple-current capability and extended endurance at elevated temperatures.

Designed for automated assembly, the part is available on embossed carrier tape and is RoHS compliant and AEC‑Q200 qualified, with a rated operating range of −55 °C to +105 °C and a 10000 hour endurance at 105 °C.

Key Features

• Capacitance & Voltage — 22 µF nominal capacitance with ±20% tolerance and a 50 V rated voltage for a wide range of board‑level power rails.
• Low ESR / High Ripple Capability — 80 mΩ ESR measured at 20 °C and 100 kHz, with ripple current ratings of 165 mA at 120 Hz and 1.1 A at 100 kHz to support AC current stress.
• Leakage Current — Low leakage of approximately 11 µA (specified as 0.01CV after 2 minutes at 20 °C), enabling stable bias behavior in DC circuits.
• Long Life & Temperature Range — 10000 hours endurance at 105 °C and a rated category temperature range of −55 °C to +105 °C for sustained high‑temperature performance.
• Reliability & Qualification — AEC‑Q200 qualified and specified for high‑reliability chip‑type operation with defined endurance, damp‑heat and soldering heat characteristics.
• Package & Assembly — Compact SMD radial can (φ6.3 × 5.8 mm) with recommended land size 6.6 × 6.6 mm and supplied on embossed carrier tape for mass production pick‑and‑place.

Typical Applications

• Automotive Electronics — AEC‑Q200 qualification and 10000 h endurance at 105 °C make this capacitor suitable for automotive electronic modules that require robust temperature and lifecycle performance.
• Surface‑Mount Power Assemblies — The SMD can package and embossed carrier taping support automated board assembly for compact power supply and converter designs.
• High Ripple Current Environments — Low ESR (80 mΩ) combined with rated ripple currents (165 mA @120 Hz, 1.1 A @100 kHz) addresses applications where AC current handling and low impedance are required.

Unique Advantages

• Low-Impedance Performance: 80 mΩ ESR at 100 kHz reduces voltage ripple and supports tighter regulation in power circuits.
• High Ripple-Current Capability: Specified ripple currents at both low and high frequencies enable use across a range of switching and AC conditions.
• Extended High-Temperature Endurance: 10000 hours at 105 °C provides predictable lifetime for designs exposed to elevated operating temperatures.
• Automotive-Grade Qualification: AEC‑Q200 qualification offers documented reliability for automotive and similarly demanding applications.
• Surface-Mount Ready: Compact φ6.3 × 5.8 mm SMD can with embossed carrier taping simplifies integration into automated production lines.
• RoHS Compliant: Materials and manufacturing meet RoHS requirements for environmental compliance.

Why Choose GYB1H220MCQ1GS?

GYB1H220MCQ1GS targets board‑level power designs that require a balance of low ESR, high ripple‑current capability and long-term thermal endurance. With AEC‑Q200 qualification, a −55 °C to +105 °C operating window, and 10000 hour life at 105 °C, it is positioned for demanding applications where reliability and consistent electrical performance matter.

Its compact surface‑mount can package and embossed carrier taping support automated assembly and conservative PCB footprint planning, delivering practical value for engineering teams specifying robust capacitors for production designs.

Request a quote or contact sales to discuss availability, lead times and volume pricing for GYB1H220MCQ1GS.