EN25QW80A-104HIP(2P)

The EN25QW80A-104HIP(2P) is an 8.389 Mbit serial NOR Flash memory device from ESMT packaged in an 8-pin SOP (200 mil) for surface-mount applications. It implements a serial SPI architecture with support for Standard, Dual and Quad SPI modes and a full operating voltage range of 1.65–3.6 V.

Designed for industrial use, this device delivers high-performance serial flash storage with a 104 MHz maximum clock rate, hardware and software protection features, and a wide -40°C to +85°C operating temperature range—making it suitable for embedded systems that require reliable non-volatile code and data storage with flexible interface and power options.

Key Features

• Memory & Organization 8.389 Mbit total capacity organized as 1M × 8 (1024 KByte), with 256-byte programmable pages and 4096 pages for fine-grained programming.
• SPI Interface Modes Supports Standard, Dual and Quad SPI (CLK, CS#, DQ₀–DQ₃) with configurable dummy cycles for flexible throughput and compatibility with a range of host controllers.
• High-Speed Operation 104 MHz clock rate supported for Standard, Dual and Quad data transfers, enabling faster read and program cycles where supported by the host.
• Program & Erase Performance Page program time listed as 1 ms typical; sector erase and block erase options with typical sector erase time of 100 ms and block erase times specified in the device documentation. Write cycle time (word/page) indicated as 4 ms.
• Low Power Typical active current around 10 mA and typical power-down current near 1 μA for power-sensitive designs.
• Robust Protection Software and hardware write-protection capabilities including WP# and HOLD# pins, lockable 3 × 1024-byte OTP security sector, and block-level protection to safeguard code and critical data.
• Uniform Sector Architecture 256 sectors of 4 KByte each, plus block groupings (32 × 32 KByte, 16 × 64 KByte) that can be erased individually for flexible update strategies.
• Reliability Minimum endurance of 100K program/erase cycles per sector and data retention specified at 20 years.
• Industrial Temperature & Package Rated for -40°C to +85°C operation and supplied in an 8-SOP (200 mil) surface-mount package suitable for industrial PCB designs. RoHS-compliant and lead-free packaging.

Typical Applications

• Embedded firmware storage — Reliable non-volatile storage for boot code and firmware in embedded controllers and industrial equipment, with block protection for safe updates.
• Field updates and code patching — Support for sector and block erase plus write protection enables targeted in-field firmware updates and secure modification of specific code segments.
• Configuration and calibration data — Lockable OTP sector and block-level protection make the device suitable for storing configuration, calibration, and unique ID data while limiting accidental modification.
• Industrial control systems — Wide supply voltage (1.65–3.6 V) and industrial temperature range allow integration into diverse industrial designs with varying power rails and thermal environments.

Unique Advantages

• Wide voltage support: 1.65–3.6 V operation simplifies integration across systems with different supply rails and reduces the need for additional power management.
• Flexible SPI performance: Standard, Dual and Quad SPI at up to 104 MHz provide designers options to balance interface complexity and throughput requirements.
• Granular erase and protection: Uniform 4 KByte sectors and block-level protection let designers implement targeted updates while protecting critical code.
• Low standby power: Typical 1 μA power-down current supports energy-efficient designs where long idle periods or battery operation matter.
• Industrial-ready reliability: 100K program/erase cycles and 20-year data retention offer long-term stability for deployed systems.
• Compact, standard package: SOP-8 (200 mil) surface-mount package eases PCB routing and placement in space-constrained industrial boards.

Why Choose EN25QW80A-104HIP(2P)?

The EN25QW80A-104HIP(2P) combines a versatile SPI interface, wide supply voltage range and industrial temperature rating to meet the needs of embedded and industrial designs requiring dependable non-volatile storage. With support for Standard/Dual/Quad SPI at up to 104 MHz, uniform sector architecture, hardware/software protection and specified endurance and retention metrics, it is well-suited for firmware storage, in-field updates, and protected configuration data.

This device is targeted at developers who need a compact, robust flash memory solution that balances performance, power efficiency and long-term reliability in industrial environments.

Request a quote or submit an inquiry to obtain pricing, lead times, and ordering options for the EN25QW80A-104HIP(2P).