EN25QX64A-104FIP(2CC)

The EN25QX64A-104FIP(2CC) is a 64 M-bit serial NOR flash memory device in the EN25QX64A series. It implements a Serial Peripheral Interface (SPI) architecture with Single, Dual and Quad I/O modes and is supplied in an industrial-temperature 16-pin SOP 300mil surface-mount package.

Designed for embedded code and data storage in industrial applications, the device delivers high-speed read performance, flexible sector/block erase organization, and hardware/software protection mechanisms for reliable firmware and data management.

Key Features

• Memory Capacity & Organization — 64 M-bit (8,192 KByte) organized as 8M × 8 with 32,768 pages and 256 bytes per programmable page for fine-grained programming and storage.
• High-speed SPI Interface — Supports Standard, Dual and Quad SPI with SPI Mode 0 and Mode 3; 104 MHz clock rate for Single/Dual/Quad I/O Fast Read and up to 133 MHz for Quad I/O Fast Read.
• Program / Erase Performance — Typical page program time 0.5 ms; typical sector erase time 40 ms; half-block and block erase and full-chip erase options provide flexible update strategies.
• Power & Low-power Modes — Single power-supply operation with full voltage range and low operating currents (typical active current 6 mA, typical standby 1 µA) to support power-conscious embedded designs.
• Robust Data Protection — Software and hardware write protection, volatile status register bits, write suspend/resume, and lockable 3 × 512-byte OTP sectors for secure, controlled updates.
• Uniform Sector Architecture — 4-Kbyte uniform sectors (2,048 sectors), plus 32-Kbyte and 64-Kbyte block partitions for flexible erase and update strategies.
• Reliability & Retention — Minimum 100K program/erase cycles per sector/block and typical data retention of 20 years for long-term fielded systems.
• Package & Temperature — Industrial temperature range (−40 °C to 85 °C) in a 16-pin SOP 300mil surface-mount package for board-level compatibility in industrial designs.

Typical Applications

• Industrial Controllers — Store firmware, configuration and calibration data with sector-level erase and write protections suited to factory automation and equipment control.
• Embedded Systems & Microcontroller Code Storage — Serve as non-volatile program and data storage for MCU-based systems that require fast read performance and reliable program/erase endurance.
• Communications & Networking Devices — Hold boot code, firmware images and configuration data where fast SPI reads and Quad I/O support accelerate boot and update operations.

Unique Advantages

• Flexible SPI Modes: Single, Dual and Quad I/O support enables migration between performance and pin-count tradeoffs without changing memory architecture.
• Fine-grained Update Control: Uniform 4-Kbyte sectors and multiple block sizes let designs erase and program small regions to minimize update time and erase wear.
• Low-power Standby: Typical 1 µA standby current supports energy-sensitive applications and reduces overall system power when the memory is idle.
• Industry-grade Robustness: Industrial operating range (−40 °C to 85 °C) and 100K program/erase cycle minimum make the device suitable for long-lived fielded products.
• Hardware and Software Protection: Comprehensive protection features, including OTP sectors and write-protect mechanisms, simplify secure firmware management and in-field updates.
• Compact Surface-mount Package: 16-pin SOP 300mil option provides a space-efficient, board-friendly package for compact industrial designs.

Why Choose EN25QX64A-104FIP(2CC)?

The EN25QX64A-104FIP(2CC) balances high-speed SPI read performance with robust program/erase endurance and a full set of protection features, making it a practical choice for industrial embedded systems that require reliable non-volatile code and data storage. Its support for Single/Dual/Quad I/O, uniform sector architecture and low-power standby make it adaptable across firmware storage, boot memory and configuration use cases.

This device suits engineers and procurement teams designing industrial controllers, networking equipment and embedded platforms that need predictable erase/program behavior, long data retention and a compact surface-mount footprint with industrial-temperature robustness.

If you’d like pricing, lead-time or availability for EN25QX64A-104FIP(2CC), request a quote or submit an RFQ and our team will provide the details you need to move forward.