BSC9132NXE7MNMB

The BSC9132NXE7MNMB is a QorIQ Qonverge multicore PowerPC e500 microprocessor from NXP Semiconductors, configured as a 2‑core, 32‑bit MPU running at 1.333 GHz in a 780‑FCBGA (23 × 23 mm) package. Targeted at embedded applications, this industrial‑qualified device combines high‑performance e500 cores with DSP subsystems and dedicated acceleration engines to address baseband, networking and secure communications workloads.

With integrated memory controllers, abundant I/O and on‑chip security features, the BSC9132NXE7MNMB delivers a compact, highly integrated platform for designs that require compute throughput, robust connectivity and hardware security in an industrial temperature range.

Key Features

• High‑performance cores: Two 32‑bit PowerPC e500 cores running at 1.333 GHz with double‑precision floating point support, 32 KB L1 instruction and 32 KB L1 data caches per core, and a 512 KB L2 cache configurable as SRAM or stashing memory.
• DSP and accelerator subsystems: Two SC3850 DSP core subsystems plus the MAPLE‑B2P Multi Accelerator Platform for baseband tasks (FFT, convolution, filtering, Turbo/Viterbi, MIMO and CRC algorithms) for targeted signal‑processing workloads.
• Memory and storage interfaces: Two DDR3/DDR3L SDRAM controllers with 32‑bit data paths and ECC support, plus an integrated flash controller (IFC) supporting NAND, NOR and general ASIC flash.
• Rich networking and I/O: Two enhanced three‑speed Ethernet controllers (10/100/1000 Mbps), one USB 2.0 controller (host/device, EHCI), enhanced SD/MMC host controller (eSDHC), and one PCI Express interface with 5G support. Four SerDes lanes can be shared among PCIe, SGMII and CPRI.
• Antenna and baseband interfaces: Antenna Interface Controller (AIC) supporting multiple JESD and custom parallel RF interfaces and a 2‑lane CPRI interface for RF front‑end connectivity.
• Integrated security and trusted boot: On‑chip ULE CAAM security engine with support for DES, AES, RNG, CRC, MDE, PKE, SHA and MD5, plus secure boot capability and additional security subsystem SEC 4.4.
• Peripheral and system integration: Multiple serial interfaces including two eSPI, two I2C, two DUARTs, two TDM interfaces, USIM, DMA controllers, 96 GPIO signals and eight 32‑bit timers for flexible peripheral connectivity and system control.
• Industrial qualification and thermal range: Industrial qualification with an operating temperature range from −40 °C to 105 °C and surface‑mount 780‑FCBGA package (23 × 23 mm) for rugged embedded deployments.

Typical Applications

• Wireless infrastructure: Baseband and RF front‑end processing for pico and small cell base stations using on‑chip accelerators, AIC and CPRI support.
• Embedded networking: High‑throughput networking equipment that leverages dual Gigabit Ethernet, PCIe and hardware TCP/IP acceleration.
• Secure communications: Applications requiring integrated cryptography, RNG and secure boot for protected data paths and trusted system start.
• Signal processing platforms: DSP‑intensive designs such as LTE/UMTS channel processing and MIMO tasks that utilize SC3850 subsystems and MAPLE‑B2P accelerators.

Unique Advantages

• Highly integrated processing platform: Combines dual e500 cores, SC3850 DSP subsystems and specialized accelerators in a single device to reduce board complexity and BOM.
• Comprehensive connectivity: Multiple high‑speed I/O options—dual Gigabit Ethernet, PCIe, SerDes lanes, USB 2.0 and eSDHC—enable versatile system architectures and connectivity choices.
• Memory robustness: Dual DDR3/DDR3L controllers with ECC support and flexible L2 cache configuration provide reliable memory operation for critical embedded workloads.
• Built‑in security and trusted boot: Integrated ULE CAAM security engine and secure boot capability help protect data and ensure trusted system startup without external crypto accelerators.
• Designed for industrial environments: Industrial qualification and a −40 °C to 105 °C operating range support deployment in demanding embedded systems.
• Targeted baseband acceleration: MAPLE‑B2P and DSP subsystems deliver ready‑made primitives for Fourier transforms, convolution, turbo/Viterbi and other common baseband algorithms.

Why Choose BSC9132NXE7MNMB?

The BSC9132NXE7MNMB positions itself as a compact, industrial‑qualified multicore platform that balances general‑purpose PowerPC processing with dedicated DSP subsystems and baseband accelerators. Its blend of on‑chip security, ECC‑protected memory interfaces and a wide array of high‑speed I/O makes it suitable for embedded designs that require integrated compute, connectivity and trusted operation.

This part is appropriate for teams building wireless infrastructure, embedded networking devices or secure communications systems who need a consolidated solution from the NXP QorIQ Qonverge family. Its combination of accelerators, peripheral breadth and industrial thermal rating supports long‑term deployments and scalable system architectures.

Request a quote or submit a pricing and availability inquiry to evaluate the BSC9132NXE7MNMB for your next embedded design.