MVF60NN151CMK50

The MVF60NN151CMK50 is a Vybrid VF6xx-series dual-core microprocessor integrating an ARM® Cortex®-A5 application core and an ARM® Cortex®-M4 companion core. The device targets embedded and industrial applications requiring a combination of application processing, real-time control and advanced security.

With an ARM Cortex-A5 up to 500 MHz and an ARM Cortex-M4 up to 167 MHz, rich display and multimedia capabilities, extensive communications interfaces and hardware security features, the MVF60NN151CMK50 delivers a highly integrated platform for HMI, industrial control, secure gateways and multimedia-enabled embedded designs.

Key Features

• Dual-core architecture — ARM Cortex-A5 application core up to 500 MHz paired with an ARM Cortex-M4 real-time core up to 167 MHz for split application and control tasks.
• Performance and DSP — NEON™ Media Processing Engine and double-precision FPU on the A5 plus integrated DSP capability on the M4 for multimedia and signal-processing workloads.
• Memory and storage interfaces — Controllers for LPDDR2 and DDR3 DRAM, 8/16-bit DRAM controller up to 400 MHz (datasheet), dual Quad SPI with XIP and 8/16-bit NAND Flash controller with ECC support.
• Display and video — Dual Display Control Unit (DCU), GPU, Video Interface Unit (VIU) and VideoADC for color TFT and camera subsystems; supports display up to SVGA (datasheet).
• Comprehensive communications — Dual 10/100 Mbps Ethernet with L2 switch and IEEE-1588 timer, USB 2.0 OTG + PHY, dual FlexCAN, six UARTs, SPI, I2C and SD host controllers.
• Security and trusted boot — ARM TrustZone, CAAM cryptographic accelerator, High Assurance Boot (HAB), Secure JTAG, Secure Non-Volatile Storage (SNVS), Real Time Integrity Checker (RTIC), tamper detection and TrustZone watchdog.
• Real-time and timing — Dual DMA controller with 32 channels (with DMAMUX), motor-control/general-purpose timers (FTM), periodic interrupt timers (PITs), low-power timer and IEEE-1588 timer per MAC.
• Analog and audio — Dual 12-bit SAR ADCs (1 MS/s), dual 12-bit DACs, multiple SAI/ESAI audio interfaces and SPDIF Rx/Tx.
• Power and clocks — Operating voltage range 3.0 V to 3.6 V, internal and external crystal oscillator support, low-jitter PLLs and multiple low-power modes for current reduction.
• Package and temperature — 364-LFBGA (17×17) surface-mount package; industrial ambient operating range −40 °C to 85 °C.
• I/O voltage — 3.3 V I/O support.

Typical Applications

• Human-Machine Interfaces (HMI) — Use the dual DCU/GPU and video interfaces to drive color TFT displays and camera-based interfaces in operator panels and kiosks.
• Industrial control and motor drive — Combine the Cortex-M4 real-time core, integrated DSP and motor-control timers for closed-loop motor control and motion applications.
• Secure gateways and networked devices — Dual Ethernet with IEEE-1588, USB OTG and extensive security features enable secure industrial gateways, protocol bridges and edge nodes.
• Multimedia embedded systems — NEON™ acceleration, audio interfaces and video support for media-rich appliances and connected devices.

Unique Advantages

• Split application and real-time processing: Dual ARM cores (A5 + M4) let designers isolate high-level OS tasks from low-latency control functions without extra external processors.
• Built-in security stack: TrustZone, CAAM, HAB, Secure JTAG and tamper features provide hardware-backed protection and support for secure boot and secure storage.
• Broad peripheral integration: Dual Ethernet, USB OTG, CAN, SD host, multiple UART/SPI/I2C and audio interfaces reduce BOM and simplify board-level design.
• Display and multimedia support: Dual DCU, VIU and NEON™ MPE enable responsive graphical user interfaces and camera/video handling on a single device.
• Industrial-grade operation: Industrial temperature range (−40 °C to 85 °C) and configurable low-power modes for reliable operation in harsh embedded environments.
• High-density package: 364-LFBGA (17×17) package provides a compact footprint while exposing extensive I/O for complex designs.

Why Choose MVF60NN151CMK50?

The MVF60NN151CMK50 positions itself as a flexible, highly integrated MPU for embedded and industrial designs that require both application-level processing and deterministic control. Its dual-core ARM architecture, rich peripheral set, display/multimedia subsystems and comprehensive security features enable consolidated system designs with fewer external components.

This device is suited for designers building industrial control systems, secure networked gateways, HMI panels and multimedia-enabled embedded products that demand performance, integration and long-term robustness supported by vendor documentation and series-level capabilities.

Request a quote or submit an inquiry to receive pricing and availability for MVF60NN151CMK50 and to discuss your application requirements.