AS4C2M32SA-6TCNTR

The AS4C2M32SA-6TCNTR from Alliance Memory is a 64Mbit synchronous DRAM (SDRAM) organized as 2M x 32, designed for high-performance embedded systems requiring fast, reliable parallel memory access. Built on proven SDRAM technology with a 166MHz clock frequency and 5.5ns access time, this component delivers the throughput needed for data-intensive applications while maintaining stable operation across a 0°C to 70°C temperature range.

Key Features

• 64Mbit Capacity with Wide Data Bus - The 2M x 32 memory organization provides a 32-bit wide data path, enabling efficient data transfer for processors and controllers that benefit from parallel access patterns.
• High-Speed Synchronous Operation - With a 166MHz clock frequency and 5.5ns access time, this SDRAM supports demanding real-time applications where memory bandwidth is critical to system performance.
• Low Write Cycle Time - A 2ns write cycle time ensures rapid data updates, reducing latency in systems with frequent memory write operations.
• Standard Voltage Operation - Operating from 3V to 3.6V, the device integrates easily into standard 3.3V logic systems without requiring additional voltage regulation.
• Commercial Temperature Range - Rated for 0°C to 70°C operation, this SDRAM is suitable for controlled-environment applications including office equipment, consumer electronics, and indoor industrial systems.
• Compact 86-TSOP II Package - The 86-pin TSOP II package with 10.16mm width offers a proven form factor with good density for space-constrained PCB designs.

Typical Applications

• Embedded Computing Systems - This SDRAM serves as main memory in embedded controllers and single-board computers where the 32-bit data path aligns well with 32-bit processor architectures, reducing the number of memory devices required.
• Networking and Telecommunications Equipment - The high-speed synchronous interface and wide data bus support buffering and packet processing in routers, switches, and communication modules operating in temperature-controlled environments.
• Consumer Electronics - Set-top boxes, digital media players, and home automation hubs benefit from the balance of capacity, speed, and cost-effectiveness that this 64Mbit SDRAM provides for firmware execution and data buffering.
• Office and Point-of-Sale Equipment - Printers, copiers, cash registers, and terminal systems use this memory for temporary data storage and display buffer management in commercial temperature environments.
• Test and Measurement Instruments - Benchtop and portable instruments leverage the parallel interface and moderate speed for data acquisition buffering and waveform storage in laboratory settings.

Unique Advantages

• Simplified BOM with Wide Data Path: The 32-bit organization reduces the number of memory ICs needed compared to narrower devices, lowering component count and simplifying PCB routing.
• Proven SDRAM Architecture: Synchronous DRAM technology offers a well-understood design path with extensive software and hardware support, reducing development risk.
• Standard Industry Packaging: The 86-TSOP II package is widely supported by PCB manufacturers and assembly houses, ensuring reliable sourcing and production.
• Active Lifecycle Status: With active production status, designers can rely on continued availability for new designs and production runs.
• Cost-Effective Memory Solution: SDRAM provides a balance between performance and cost for applications that don't require the advanced features of DDR memory but need more speed than asynchronous DRAM.
• Low Integration Complexity: Standard parallel interface and voltage levels simplify integration with common microcontrollers and processors without requiring specialized memory controllers.

Why Choose AS4C2M32SA-6TCNTR?

The AS4C2M32SA-6TCNTR is positioned for embedded system designers who need reliable, cost-effective memory with a wide data path and synchronous operation. Its 166MHz clock support and 32-bit organization make it particularly suitable for systems built around 32-bit processors in commercial temperature applications. Alliance Memory's focus on long-term availability helps ensure that designs using this component can remain in production without facing unexpected obsolescence issues.

For applications in controlled environments where the 0°C to 70°C range is adequate, this SDRAM delivers the throughput and capacity needed for embedded computing, networking equipment, and consumer electronics without the complexity and cost of more advanced memory technologies.

Request a Quote

Contact our sales team to discuss your memory requirements and receive pricing for the AS4C2M32SA-6TCNTR. Our technical support staff can assist with integration questions and help ensure this SDRAM meets your application needs.