EN25Q32C-104HIP(2B)

The EN25Q32C-104HIP(2B) is a 32 Megabit (4,096 K-byte) serial NOR flash memory organized as 4M × 8 and built on an SPI NOR architecture. It supports Standard, Dual and Quad SPI I/O with high-performance read rates up to a 104 MHz SPI clock, making it suitable for embedded firmware and code storage in industrial and commercial systems.

Designed for robust operation, the device provides uniform 4 Kbyte sectors, multiple program/erase options, and an industrial operating temperature range, offering a balance of performance, flexibility and long-term data retention for system designers.

Key Features

• Memory Capacity & Organization — 32 Mbit (4,096 K-byte) memory organized as 4M × 8 with 256-byte programmable pages.
• SPI Interface & Modes — Serial Peripheral Interface compatible with Standard, Dual and Quad SPI (Standard SPI pins: CLK, CS#, DI, DO, WP#).
• High-Speed Read — Supports up to 104 MHz clock rate for Standard, Dual and Quad operation; Dual/Quad I/O enables equivalent data rates of 2× and 4× the clock through multi-bit transfers.
• Uniform Sector Architecture — 1,024 sectors of 4 Kbyte, 128 blocks of 32 Kbyte and 64 blocks of 64 Kbyte; any sector or block can be erased individually.
• Program & Erase Performance — Typical page program time 0.6 ms; typical sector erase time 50 ms; 32 Kbyte block erase 120 ms; 64 Kbyte block erase 150 ms; chip erase typical 15 seconds.
• Write Protection & Security — Software and hardware write protection including WP# pin; three sets of OTP lockable 512-byte security sectors and read unique ID support.
• Endurance & Retention — Minimum 100K program/erase cycles per sector or block and 20 years data retention.
• Low Power — Typical active current around 5 mA and typical power-down current approximately 1 µA.
• Voltage & Supply — Single power-supply operation with full voltage range 2.7–3.6 V.
• Package & Temperature — Available in an 8-pin SOP 200 mil (surface-mount) package; industrial operating temperature range −40 °C to 85 °C.
• Standards & Discoverability — Supports Serial Flash Discoverable Parameters (SFDP) signature for interface discovery.
• RoHS Compliance — Pb‑free packages compliant with RoHS, Halogen‑Free and REACH declarations.

Typical Applications

• Industrial Control: Firmware and parameter storage in industrial controllers and automation equipment, enabled by the −40 °C to 85 °C operating range and 100K program/erase endurance.
• Embedded Systems: Code shadowing and non-volatile data storage for microcontroller-based platforms using a high-speed SPI interface and Quad I/O modes for accelerated read performance.
• Networking & Communications: Boot code and configuration storage for network appliances where fast read timing and SFDP support simplify host interface integration.
• Consumer & Commercial Devices: Firmware updates and secure data storage using OTP lockable sectors and hardware/software write protection.

Unique Advantages

• Flexible Performance Modes: Standard, Dual and Quad SPI support with a 104 MHz clock lets designers scale throughput without changing the memory family.
• Granular Erase Control: Uniform 4 Kbyte sectors and multiple block sizes allow targeted erase operations to reduce system downtime and flash wear.
• Secure Storage Options: OTP lockable security sectors and read-unique-ID capability add layers of protection for critical firmware and intellectual property.
• Long-Term Reliability: 100K program/erase cycles and 20-year data retention provide predictable longevity for deployed systems.
• Low Power Operation: Typical active and power-down currents support energy-conscious designs and reduce overall system power consumption.
• Industrial Temperature Support: −40 °C to 85 °C rating enables deployment across a wide range of environmental conditions.

Why Choose EN25Q32C-104HIP(2B)?

The EN25Q32C-104HIP(2B) combines a proven SPI NOR architecture with high-speed Standard/Dual/Quad read modes and a uniform sector layout to deliver flexible, reliable non-volatile storage for firmware and data. Its balance of program/erase performance, endurance and long-term retention makes it a practical choice for embedded and industrial designs that require predictable flash behavior.

With low-power operation, hardware and software protection mechanisms, SFDP support and RoHS-compliant packaging in an industry-standard 8-pin SOP, this device is well suited to designers who need compact, robust flash memory with clear electrical and timing characteristics.

Request a quote or submit an inquiry to obtain pricing and availability for EN25Q32C-104HIP(2B). Our team can provide lead time and packaging options to support your design and production schedule.