EN25F10A-104GIP(2NF)

The EN25F10A-104GIP(2NF) is a 1 Mbit serial SPI NOR flash memory organized as 128K × 8. It provides non-volatile code and data storage in a compact 8‑lead SOP 150mil surface-mount package and is offered in an industrial temperature grade (–40 °C to 85 °C).

Built on a serial SPI architecture with Standard/Dual/Quad modes and up to a 104 MHz clock, this device is designed for high-performance read throughput, flexible sector/block erase, and low-power operation for embedded and industrial applications.

Key Features

• Memory Capacity & Organization — 1.049 Mbit total organized as 128K × 8 with 256‑byte programmable pages and 512 pages per device.
• Serial SPI Interface — SPI compatible with Mode 0 and Mode 3; supports Standard, Dual and Quad SPI operations using DQ₀–DQ₃ for high-speed read modes.
• High Clock Rate — 104 MHz maximum clock for Standard SPI, with equivalent higher data rates when using Dual/Quad modes.
• Program / Erase Performance — Typical page program time 0.5 ms; sector erase typical 40 ms; 32 KB and 64 KB block erase and full chip erase (typical times documented in datasheet).
• Power — Low-power operation with typical active current around 5 mA and typical power-down current around 1 μA.
• Voltage Range — Single power supply operation; documented full voltage range 2.3–3.6 V with a nominal supply point in product data (2.5 V).
• Security & Identification — On-chip OTP (three lockable 512‑byte security sectors) and support for reading a Unique ID and SFDP signature.
• Reliability — Minimum 100K program/erase cycles per sector and typical data retention specified at 20 years.
• Package & Temperature — Surface-mount 8‑lead SOP 150mil package; industrial operating temperature –40 °C to 85 °C.

Typical Applications

• Industrial Control — Non-volatile code and configuration storage in industrial controllers and automation modules, supported by the –40 °C to 85 °C operating range.
• Embedded Systems — Firmware storage and boot code in embedded devices where compact 8‑pin packaging and serial SPI interface are required.
• Connectivity & Peripherals — Storage for configuration, calibration, or lookup tables in devices that benefit from high-speed SPI read modes (Dual/Quad) and low power standby.

Unique Advantages

• Flexible High‑Speed SPI Modes — Standard, Dual and Quad SPI support with up to 104 MHz clock enables higher effective throughput for fast boot and data access.
• Uniform Sector Architecture — 4 KB uniform sectors (plus multiple block sizes) let you erase only what you need, simplifying firmware updates and minimizing erase time for smaller changes.
• Low Power Envelope — Typical active and power-down currents enable integration into power-conscious designs while maintaining responsive read/program performance.
• Robust Endurance & Retention — Specified minimum 100K program/erase cycles and 20 years data retention provide predictable long-term reliability for deployed systems.
• Compact Industrial Packaging — 8‑lead SOP 150mil surface mount package offers a small PCB footprint while meeting industrial temperature requirements.
• Security & Interoperability Features — Lockable OTP sectors, Unique ID readout and SFDP support help with secure boot strategies and standard device discovery.

Why Choose EN25F10A-104GIP(2NF)?

The EN25F10A-104GIP(2NF) combines a compact industrial package with a high-performance SPI NOR architecture to deliver reliable non-volatile storage for embedded and industrial applications. Its support for Standard/Dual/Quad SPI, 104 MHz clocking, and uniform sector erase offer designers flexible trade-offs between speed, granularity, and power.

This device is well suited to engineers seeking a proven, compact flash solution with documented program/erase endurance, long data retention, and security features such as lockable OTP and Unique ID. The combination of low power modes, industrial temperature range, and multiple package options simplifies integration across a range of products and environments.

Request a quote or submit an inquiry for pricing and availability to evaluate the EN25F10A-104GIP(2NF) for your next design.