EN25S80B-104HIP(2SC)

The EN25S80B-104HIP(2SC) from ESMT is an 8 Mbit serial NOR Flash memory device designed for embedded code and data storage in industrial applications. Built on an SPI NOR architecture, it delivers high-speed read performance with support for Standard, Dual and Quad SPI modes to meet a range of system interface and throughput needs.

This surface-mount device is offered in an 8-pin SOP (200 mil) package and is specified for industrial temperature operation (−40°C to 85°C), making it suitable for ruggedized and long-life embedded systems requiring non-volatile storage with sector-level erase and robust write-protect features.

Key Features

• Memory 8 M-bit (1024 KByte) serial NOR Flash organized as 1M × 8 with 256-byte programmable pages and 4096 programmable pages for fine-grained data and code storage.
• Interface & Modes SPI-compatible serial interface with Standard, Dual and Quad SPI support (CLK, CS#, DI/DO, WP#, HOLD# signals) for flexible system integration.
• High-speed Read Fast read performance up to 104 MHz (standard and dual SPI with 1 dummy byte; quad SPI supported) to accelerate code execution and data transfers.
• Program & Erase Uniform sector architecture with 4 KByte sectors, 32 × 32 KByte blocks and 16 × 64 KByte blocks. Supports sector/block/chip erase with typical page program and erase timings documented in the datasheet.
• Low Power Typical active current around 4.5 mA and deep power-down current near 0.1 μA, enabling low-energy standby operation in battery-assisted systems.
• Reliability Minimum 100k program/erase cycles per sector and data retention specified at 20 years for long-term field reliability.
• Security & Protection Software and hardware write-protect options including WP# pin, lockable OTP sectors and configurable protection of blocks to prevent accidental or unauthorized writes.
• Package & Temperature 8-pin SOP 200 mil body width surface-mount package rated for industrial temperature range −40°C to 85°C; RoHS-compliant.
• System Compatibility Supports Serial Flash Discoverable Parameters (SFDP) and unique ID read to aid system integration and inventory.

Typical Applications

• Industrial Control Stores firmware, configuration and calibration data in PLCs, motor controllers and factory automation equipment where industrial temperature operation is required.
• Embedded Consumer & IoT Devices Provides non-volatile program and data storage for consumer electronics, smart sensors and edge devices that benefit from fast SPI reads and low power standby.
• Networking & Communications Holds boot code, configuration tables and non-volatile parameters in routers, gateways and access points that use SPI Flash for firmware delivery.
• Firmware Storage & Field Upgrades Enables in-field firmware updates with per-sector protection and write suspend/resume features for reliable firmware management.

Unique Advantages

• High-speed SPI operation: 104 MHz fast read modes reduce code fetch latency and improve boot and runtime performance in embedded systems.
• Flexible I/O modes: Standard, Dual and Quad SPI support lets designers trade pin usage for throughput without changing memory density.
• Granular erase architecture: 4 KByte uniform sectors and multiple block sizes simplify wear leveling and targeted updates to minimize erase impact.
• Low standby power: Very low power-down current supports energy-efficient designs and long battery life in portable or remote equipment.
• Industrial-grade operation: −40°C to 85°C rating and robust program/erase endurance provide long-term reliability in harsh environments.
• Compact surface-mount package: 8-pin SOP 200 mil package minimizes PCB footprint while providing easy assembly for volume production.

Why Choose EN25S80B-104HIP(2SC)?

The EN25S80B-104HIP(2SC) positions itself as a practical, industrial-grade SPI NOR Flash solution combining 8 Mbit density, high-speed 104 MHz read capability, and a versatile Standard/Dual/Quad SPI interface. Its uniform 4 KByte sector architecture, robust program/erase endurance and low-power modes make it well suited for embedded systems that require reliable non-volatile storage for firmware, configuration and critical data.

This device is appropriate for designers seeking a compact, surface-mount memory with clear sector management, hardware and software write protection, and long-term data retention. Its industrial temperature rating and standard 8-pin SOP packaging support broad deployment across industrial and embedded product lines.

Request a quote or submit an inquiry to obtain pricing, lead times and availability for EN25S80B-104HIP(2SC).