P1010NXE5HHB

The P1010NXE5HHB is a single‑core PowerPC e500v2 microprocessor in the QorIQ P1 family, delivering 1.0 GHz performance in a compact 425‑TEPBGA (19×19) surface‑mount package. It combines a low‑power 45 nm implementation with a trusted security platform and a rich set of integrated interfaces for cost‑sensitive embedded networking and industrial designs.

This industrial‑qualified device targets applications such as wireless LAN access points, SOHO/SMB routers, Ethernet switch controllers, network attached storage, video surveillance and factory automation, providing integrated networking, storage and security capabilities in one processor.

Key Features

• Core & Performance  PowerPC e500v2 single 32‑bit core running at 1 GHz, with 32 KB instruction and 32 KB data L1 caches and a 256 KB frontside cache for deterministic embedded performance.
• Security Engine & Secure Boot  Integrated SEC 4.4 security coprocessor with AES, DES, MDH and public‑key accelerators, four crypto channels and an RNG. Secure Boot and a secure fusebox provide authenticated boot and protected key storage.
• Memory Subsystem  Integrated DDR3/DDR3L memory controller (supports 16/32‑bit configurations) for flexible system memory options in embedded platforms.
• Networking & Connectivity  Three 10/100/1000 Mbps Ethernet interfaces and additional interfaces including CAN and USB 2.0 with PHY to support a wide range of connectivity scenarios.
• Storage & Peripherals  Two SATA 3 Gbps ports for storage and NAS applications, plus general‑purpose interfaces (SPI, DUART, GPIO, I2C, SD/MMC) exposed by the QorIQ architecture.
• Industrial Packaging & Temperature  425‑TEPBGA I (19×19) surface‑mount package with industrial qualification and an operating temperature range of ‑40 °C to 105 °C.
• Low‑Power Implementation  Built on 45 nm process technology to optimize power efficiency for always‑on networking and embedded control applications.

Typical Applications

• Wireless LAN Access Points  Single‑core processing and integrated Ethernet make the device suitable for 802.11 access point controllers requiring secure connectivity.
• SOHO/SMB Routers and Switch Controllers  Triple Gigabit Ethernet ports and the SEC engine support routing, switching control and accelerated security processing.
• Network Attached Storage (NAS)  Dual SATA 3 Gbps ports and XOR engine support RAID and storage acceleration in compact NAS designs.
• Video Surveillance  Deterministic single‑core performance and robust I/O facilitate networked video capture and secure streaming appliances.
• Factory Automation & Industrial Control  Industrial temperature rating, CAN interface and robust security features make it suitable for control and automation nodes.

Unique Advantages

• Highly integrated I/O: Consolidates Ethernet, SATA, USB, CAN and multiple peripheral interfaces to reduce BOM and simplify board design.
• Built‑in security accelerators: SEC 4.4 with multi‑algorithm crypto engines and RNG accelerates IPSec/SSL/TLS/802.11i workloads while protecting boot and keys.
• Storage‑friendly features: XOR engine and dual SATA ports support RAID and efficient storage subsystem implementations.
• Industrial readiness: Rated for ‑40 °C to 105 °C and supplied in a robust 425‑TEPBGA package for embedded industrial deployments.
• Deterministic cache architecture: L1 instruction/data caches and a 256 KB frontside cache provide predictable performance for embedded workloads.
• Low‑power process: 45 nm implementation reduces energy consumption for always‑on network and control devices.

Why Choose P1010NXE5HHB?

The P1010NXE5HHB positions itself as a compact, secure and cost‑effective single‑core solution for designers targeting networking, storage and industrial embedded markets. Its combination of a PowerPC e500v2 core, integrated DDR3/DDR3L memory controller, multiple Gigabit Ethernet interfaces and a comprehensive security engine enables consolidated system designs with built‑in data protection.

As a member of the QorIQ P1 family, this processor is tailored for cost‑sensitive applications that demand industrial operating range, hardware‑assisted security and a broad set of peripheral connectivity—all in a 425‑TEPBGA surface‑mount package.

Request a quote or submit an inquiry to receive pricing and availability information for the P1010NXE5HHB.