UCD0J102MNS1GS

The UCD0J102MNS1GS from Nichicon is a chip‑type, low‑impedance aluminum electrolytic capacitor designed for surface‑mount assembly. It delivers 1000 µF capacitance at 6.3 V in a compact φ8 × 10 mm SMD can and targets demanding electronic systems that require stable capacitance, elevated temperature endurance and vibration resistance.

Engineered for use in automotive and industrial electronics, the UCD series component offers a combination of low loss (tan δ), defined ripple current ratings across frequency, and AEC‑Q200 qualification for designs that demand long-term reliability in harsh environments.

Key Features

• Capacitance & Voltage — 1000 µF nominal capacitance at a rated voltage of 6.3 V, with tolerance of −20% to +20% for predictable energy storage and smoothing in low‑voltage systems.
• Low Impedance / Loss — Specified tangent of loss angle (tan δ) of 0.26 measured at 20°C, 120 Hz, supporting lower dissipation and improved AC performance compared with higher‑loss electrolytics.
• Ripple Current Ratings — Low‑frequency ripple current: 300 mA at 120 Hz; high‑frequency ripple current: 600 mA at 10 kHz, enabling reliable filtering across a range of switching and line frequencies.
• Leakage Current — Leakage current of 63 µA after standard voltage application, consistent with the part’s capacitance and rated voltage for controllable standby current.
• High Temperature Endurance — Rated endurance of 5000 hours at 105°C, supporting long life under elevated operating temperatures.
• Wide Operating Temperature — Operates from −55°C to +105°C to accommodate thermal extremes encountered in automotive and industrial environments.
• Surface‑Mount Package — Chip type, radial can for SMD mounting; physical size φ8 × 10 mm with recommended land pattern 8.3 × 8.3 mm and packaged in embossed carrier tape for automated placement.
• Reliability & Compliance — AEC‑Q200 qualified and RoHS compliant, indicating conformance to automotive component stress screening and environmental directives.
• Vibration Resistance — Product is specified as vibration resistant, suitable for applications where mechanical robustness is required.

Typical Applications

• Automotive Electronic Modules — Compact SMD form factor, AEC‑Q200 qualification and −55°C to +105°C rating make this capacitor suitable for power filtering and energy storage in electronic control units and in‑vehicle modules.
• Power Supply Smoothing — 1000 µF capacitance with low impedance and specified ripple currents (300 mA @120 Hz, 600 mA @10 kHz) supports smoothing and decoupling in DC/DC converters and low‑voltage power rails.
• Vibration‑Prone Environments — Vibration‑resistant construction and embossed carrier taping for automated placement make it a fit for equipment exposed to mechanical stress.

Unique Advantages

• AEC‑Q200 Qualification: Provides explicit suitability for automotive electronic applications where supplier qualification is required.
• High‑Temperature Endurance: 5000 hours at 105°C offers long operating life under elevated thermal stress, helping to extend system service life.
• Balanced AC Performance: Low tan δ and defined ripple current ratings across low and high frequencies enable predictable performance in switching and linear power stages.
• Compact SMD Can: φ8 × 10 mm package and small recommended land pattern (8.3 × 8.3 mm) reduce board area while retaining high capacitance.
• Automated Assembly Ready: Embossed carrier taping supports pick‑and‑place mounting workflows for high‑volume manufacturing.
• Low Standby Leakage: 63 µA leakage current at rated conditions supports lower quiescent draw for battery‑sensitive systems.

Why Choose UCD0J102MNS1GS?

UCD0J102MNS1GS combines a high 1000 µF capacitance in a compact SMD aluminum can with low loss, defined ripple handling, and long high‑temperature endurance. Its AEC‑Q200 qualification and wide −55°C to +105°C operating range make it well suited to automotive and industrial designs that require reliable bulk capacitance under thermal and mechanical stress.

For designers seeking a surface‑mount aluminum electrolytic that balances size, ripple capability and durability, this Nichicon UCD series part offers a verifiable specification set and supply‑chain friendly packaging for automated assembly and production scaling.

Request a quote or contact sales to discuss availability, pricing and delivery for UCD0J102MNS1GS.