UPJ1H101MPD6

CAP ALUM 100UF ±20% 50V RADIAL
Part Description

100 µF 50 V ±20% Aluminum Electrolytic Capacitor, Radial Lead

Quantity 1,210 Available (as of November 3, 2026)
Product CategoryAluminum Electrolytic Capacitors
Part SeriesUPJ
ManufacturerNichicon
Manufacturing StatusMass Production
Manufacturer Standard Lead TimeContact Us
Datasheet

Specifications & Environmental

ApplicationsGeneral PurposeCapacitance100 µFECCNEAR99
ESRN/AHeight Seated (Max)1.75 cmHTS Code8532.22.0020
ImpedanceN/ALead Spacing5 mmLifetime @ Temp5000 h @ 105°C
Moisture Sensitivity LevelN/AMounting MethodRadial LeadOperating Temperature-55°C - 105°C
Package / CaseRadial, CanPolarizationPolarRatingsN/A
REACH ComplianceREACH AffectedRipple Current High Frequency385 mA @ 1 kHzRipple Current Low Frequency200.2 mA @ 120 Hz
RoHS ComplianceCompliantSize / Dimension16 x 10 mmSurface Mount Land SizeN/A
Tolerance-20%~20%Voltage50 V

Overview of UPJ1H101MPD6 – 100 µF, 50 V Radial Aluminum Electrolytic Capacitor

The UPJ1H101MPD6 is a miniature radial-lead aluminum electrolytic capacitor from Nichicon’s UPJ series designed for general-purpose power applications. It delivers 100 µF capacitance at a 50 V rated voltage in a compact φ10 × 16 mm can, with a polarized radial-lead form factor suitable for through-hole assemblies.

Engineered for low impedance and extended load life, this unit is suited to switching power supplies, DC-DC converters and other power-rail smoothing roles where long-term reliability and ripple handling are required. It is RoHS compliant and available in bulk/bag packaging for production quantities.

Key Features

  • Capacitance & Voltage — 100 µF nominal capacitance with ±20% tolerance at 120 Hz, 20°C, and a 50 V rated voltage for DC power-rail applications.
  • Low Loss / Low Impedance — Tangent of loss angle (tanδ) of 0.10 at 20°C, 120 Hz, supporting reduced dissipation under AC ripple conditions.
  • High Ripple Current Capability — Rated ripple current of 200.2 mA at 120 Hz (low frequency) and 385 mA at 1 kHz (high frequency) for effective ripple suppression in switching environments.
  • Leakage Current — Specified leakage current of 150 µA, measured after rated voltage application, suitable for typical power-supply leakage budgets.
  • Long Load Life — Endurance specified at 5000 hours at 105°C (for applicable case sizes), reflecting the UPJ series’ long-life design for continuous operation at elevated temperature.
  • Operating Temperature Range — Rated from −55°C to +105°C to cover a wide range of environmental and thermal conditions.
  • Mechanical & Mounting — Radial lead, can package with φ10 × 16 mm body size, 5 mm lead spacing (±0.5 mm tolerance) and bulk/bag packing options for production handling.
  • Compliance & Availability — RoHS compliant and listed as mass production status.

Typical Applications

  • Switching Power Supplies — Output and input filtering where low impedance and long life at elevated temperature improve regulator stability and reliability.
  • DC-DC Converters — Energy storage and ripple suppression on converter rails, leveraging the part’s high-frequency ripple current rating.
  • Industrial Power Electronics — Smoothing and decoupling for control boards and power modules operating over wide temperature ranges.
  • General Purpose Electronics — Bulk decoupling and power-rail stabilization in consumer and professional equipment requiring reliable polarized capacitors.

Unique Advantages

  • Extended Thermal Endurance: Specified 5000-hour load life at 105°C (for applicable case sizes), supporting continuous operation in thermally demanding applications.
  • Measured Low Loss: tanδ of 0.10 at 20°C, 120 Hz, indicating low dissipation under AC conditions and contributing to stable thermal behavior.
  • Dual-Frequency Ripple Ratings: Explicit ripple current ratings at 120 Hz and 1 kHz (200.2 mA and 385 mA respectively) provide clear guidance for both line-frequency and switching-frequency designs.
  • Compact Radial Can: φ10 × 16 mm package with 5 mm lead spacing offers a small footprint for through-hole assemblies while retaining adequate capacitance and ripple handling.
  • Production-Ready Packaging: Available in bulk/no terminal forming and bag packing, with mass-production status to support volume procurement and assembly.
  • Regulatory Compliance: RoHS compliant to meet environmental restrictions for commercial and industrial products.

Why Choose UPJ1H101MPD6?

The UPJ1H101MPD6 combines a compact radial can with performance-focused specifications—100 µF at 50 V, low loss (tanδ 0.10), defined ripple ratings at 120 Hz and 1 kHz, and a rated life at 105°C—to address power-filtering needs in switching supplies, DC-DC converters, and industrial electronics. Its polarized design and clear mechanical dimensions simplify integration into through-hole assemblies.

This part is well suited for engineers and procurement teams seeking a reliable, RoHS-compliant electrolytic capacitor with documented endurance and ripple performance for medium-power applications where long-term stability is required.

Request a quote or contact sales to discuss pricing, lead times, and volume availability for UPJ1H101MPD6.

Request a Quote

















    No file selected



    Our team will respond within 24 hours.


    I agree to receive newsletters and promotional emails. I can unsubscribe at any time.

    Certifications and Membership
    NQA AS9100 CMYK ANAB
    NQA AS9100 ANAB Badge
    ESD2020 Badge
    ESD2020 Association Badge
    GIDEP Badge
    GIDEP Badge
    Suntsu ERAI MemberVerification
    Suntsu ERAI Member Verification
    Available Shipping Methods
    FedEx
    UPS
    DHL
    Accepted Payment Methods
    American Express
    American Express
    Discover
    Discover
    MasterCard
    MasterCard
    Visa
    Visa
    UnionPay
    UnionPay

    Date Founded: 1950


    Headquarters: Nakagyo, Kyoto, Japan


    Employees: 5,000+


    Revenue: $1.2 Billion


    Certifications and Memberships: ISO9001:2015, IATF16949:2016


    Featured Products
    Latest News
    keyboard_arrow_up