UPM2A4R7MED

The UPM2A4R7MED is a polarized aluminum electrolytic capacitor from Nichicon’s UPM series. It delivers 4.7 µF capacitance at a 100 V rating in a compact radial-lead can (φ6.3 × 11 mm) designed for through-hole assemblies and bulk or bag packing.

This part is specified for operation from −55°C to +105°C, carries AEC‑Q200 rating and RoHS compliance, and provides defined performance data including tanδ, ripple currents and leakage current. Note: this part is listed as End Of Life.

Key Features

• Capacitance & Voltage — 4.7 µF rated capacitance at 100 V.
• Temperature Range — Rated for −55°C to +105°C operation, suitable for environments requiring wide operating temperature capability.
• Loss Characteristic — Low dissipation factor: tanδ = 0.08 measured at 20°C, 120 Hz, supporting lower ESR behavior in the specified conditions.
• Ripple Current — Low-frequency ripple current 17 mA (120 Hz) and high-frequency ripple current 34 mA (200 kHz) as specified for this part.
• Leakage Current — Specified leakage current of 14.1 µA, enabling predictable bias performance.
• Endurance — Rated life/ endurance of 2000 hours at the upper temperature limit of 105°C.
• Form Factor & Mounting — Radial lead can with 2.5 mm lead spacing and physical size φ6.3 × 11 mm for compact through-hole placement.
• Compliance & Qualification — AEC‑Q200 rating and RoHS compliant for regulated and automotive-grade applications.
• Tolerance — Capacitance tolerance −20% to +20%.
• Packaging Options — Available in bulk (no terminal forming) and bag packing for prototyping or production handling.

Typical Applications

• Automotive systems — Suited for automotive electronics that specify AEC‑Q200 components and require operation across −55°C to +105°C.
• Through-hole assemblies — Radial-lead can form factor and 2.5 mm lead spacing simplify mounting in board-level designs that use through-hole components.
• Power-supply modules — 100 V rating and defined ripple/current specs make it applicable where higher-voltage smoothing or decoupling is required.

Unique Advantages

• High-voltage capability: 100 V rating supports higher-voltage circuits without series stacks or additional components.
• Wide operating temperature: −55°C to +105°C rating supports designs exposed to extreme thermal conditions.
• AEC‑Q200 qualification: Enables specification in automotive-related designs that require qualified components.
• Compact radial package: φ6.3 × 11 mm can and 2.5 mm lead spacing provide a small footprint for through-hole board real estate.
• Predictable electrical parameters: Specified tanδ, ripple currents and leakage current allow for deterministic circuit behavior in design validation.
• Packaging flexibility: Bulk and bag options accommodate both prototyping and higher-volume handling workflows.

Why Choose UPM2A4R7MED?

UPM2A4R7MED is part of Nichicon’s UPM series, offering a compact, radial, polarized electrolytic solution with a 100 V rating and defined electrical characteristics for designs that demand predictable performance across a wide temperature range. Its AEC‑Q200 qualification and RoHS compliance make it a practical choice where automotive-grade componentry and regulatory compliance are required.

This part is appropriate for engineers specifying through-hole capacitors for power-supply smoothing and decoupling in higher-voltage circuits or for automotive electronic modules that need defined endurance (2000 h at 105°C) and controlled leakage and loss figures.

Request a quote or submit an inquiry to check current stock and pricing for UPM2A4R7MED and to confirm availability given this part’s End Of Life status.