UPM2A680MPD

The UPM2A680MPD is a radial-lead aluminum electrolytic capacitor designed for low impedance and high-reliability applications. It delivers 68 µF capacitance at a 100 V rating in a compact φ10 × 25 mm can, optimized for environments that demand sustained performance up to +105°C.

With AEC‑Q200 qualification and a 5000-hour endurance at 105°C, this capacitor targets designs where long-term thermal stability, ripple handling and compact radial mounting are required.

Key Features

• Capacitance & Voltage: 68 µF rated capacitance with a 100 V maximum rated voltage and ±20% tolerance at 120 Hz, 20°C.
• Low Impedance & Loss: Low impedance characteristic (210 mΩ) and tanδ 0.08 measured at 20°C, 120 Hz, 100 V for efficient energy handling and reduced heating.
• High Ripple Current Capability: Handles 255 mA at 120 Hz (low frequency) and 500 mA at 200 kHz (high frequency), supporting circuits with substantial AC ripple loads.
• Long Life & Wide Temperature Range: Endurance of 5000 hours at 105°C and rated operation from -55°C to +105°C for sustained performance in elevated-temperature environments.
• Radial Lead Can Package: Polar aluminum can, radial lead mounting with φ10 × 25 mm size, 5 mm lead spacing (±0.5 mm) for through‑hole assembly and robust mechanical fixation.
• Leakage Current: Specified leakage current of 204 µA for predictable off-state behavior after voltage application.
• AEC‑Q200 Qualified & RoHS Compliant: Meets AEC‑Q200 qualification and is RoHS compliant, supporting applications with automotive-grade expectations and environmental compliance.
• Packaging & Availability: Available in bulk (no terminal forming) or bag packing and currently in mass production.

Typical Applications

• Automotive electronics: Designed for automotive modules where AEC‑Q200 qualification, 100 V rating and operation from -55°C to +105°C are required.
• Power conversion and DC link circuits: Suited to circuits that require 68 µF at up to 100 V with low impedance and defined ripple current capability.
• High-temperature, long-life systems: Applicable where 5000 hours endurance at 105°C and stable capacitance over time are important design criteria.
• Through-hole radial assemblies: Fits PCB designs that use radial-lead components and require a compact φ10 × 25 mm footprint with 5 mm lead spacing.

Unique Advantages

• Engineered for elevated temperatures: 5000-hour endurance at 105°C provides predictable long-term performance in hot environments.
• Measured ripple performance: Specified ripple current ratings at both 120 Hz and 200 kHz enable selection based on the actual operating ripple spectrum.
• Low-loss operation: Tangent of loss angle (tanδ) of 0.08 and low impedance (210 mΩ) help minimize dissipation under bias.
• Automotive-grade qualification: AEC‑Q200 rating supports use in applications that require automotive-level reliability and supplier traceability.
• Compact radial form factor: φ10 × 25 mm can with 5 mm lead spacing simplifies through-hole placement while conserving board area.
• Predictable leakage behavior: Defined leakage current (204 µA) aids margining in power and hold-up designs.

Why Choose UPM2A680MPD?

UPM2A680MPD offers a balance of capacitance, voltage rating and thermal endurance in a compact radial-lead aluminum can. Its low impedance, clearly specified ripple current capability and AEC‑Q200 qualification make it a practical choice for designs that demand long-term stability at elevated temperatures.

This part is suited to engineers and procurement teams designing or sourcing capacitors for high-temperature, ripple-intensive circuits—particularly where automotive-grade qualification and RoHS compliance are required. Its packaging options and mass production status support predictable supply and straightforward assembly.

Request a quote or submit an inquiry to Nichicon for pricing, availability and lead-time information for UPM2A680MPD.