UUG2C101MNJ1MS

The UUG2C101MNJ1MS is a chip-type aluminum electrolytic capacitor in a surface-mount radial can package, offering 100 µF capacitance at a 160 V rating. Designed for applications requiring higher capacitance in an SMD form factor, this part combines high-voltage capability with controlled loss and defined ripple performance.

Targeted at automotive power electronics and other industrial systems, the device provides defined endurance and electrical characteristics—including AEC‑Q200 qualification—along with embossed carrier taping for automated assembly.

Key Features

• Electrical Performance — 100 µF capacitance with ±20% tolerance and rated voltage of 160 V, suitable where higher-voltage bulk capacitance is required.
• Loss Characteristics — tanδ (DF) 0.2 measured at 20°C, 120 Hz and 160 V, providing predictable ESR-related behavior for design calculations.
• Ripple Handling — Low-frequency ripple current 590 mA (120 Hz) and high-frequency ripple current 944 mA (10 kHz), documented for thermal and filtering design considerations.
• Leakage and Endurance — Leakage current 740 µA (measured after 1 minute at 20°C) and rated endurance of 2000 hours at 85°C with capacitance change within ±20% after test.
• Thermal & Environmental Range — Operating temperature range −40°C to 85°C, supporting typical automotive and industrial temperature environments.
• Package & Assembly — Chip radial can SMD package, size φ18 × 16.5 mm (L), surface-mount land size L: 1.83 × W: 1.83 cm, supplied in embossed carrier taping for pick-and-place.
• Automotive-Grade Reliability — Rated AEC‑Q200, indicating suitability for automotive electronic designs that reference AEC testing requirements.
• Product Status — End Of Life; plan lifecycle management and ordering accordingly.

Typical Applications

• Automotive power electronics — Bulk energy storage and smoothing in vehicle electronic power circuits that require high-voltage SMD capacitors.
• Automotive control modules — DC bus decoupling and transient absorption in control and power distribution modules where AEC‑Q200 qualification is needed.
• Industrial power systems — High-voltage filtering and ripple management in compact surface-mount designs operating across −40°C to 85°C.

Unique Advantages

• High-voltage capability: 160 V rating enables use where elevated DC voltages are present while maintaining compact SMD packaging.
• Documented ripple performance: Specified ripple currents at both low and high frequencies allow engineers to size parts for thermal and lifetime constraints.
• Automotive-grade testing: AEC‑Q200 rating supports integration into automotive designs with established qualification expectations.
• Predictable endurance: 2000 hours at 85°C with defined limits on capacitance change and tanδ, aiding reliability planning and lifetime estimation.
• Assembly-ready packaging: Embossed carrier taping and SMD can package simplify automated board assembly for high-volume production.

Why Choose UUG2C101MNJ1MS?

The UUG2C101MNJ1MS delivers a high-capacitance, high-voltage SMD solution with quantified electrical performance and endurance for demanding power applications. Its combination of 100 µF at 160 V, specified ripple currents, and AEC‑Q200 rating make it appropriate for vehicle and industrial power electronics where predictable behavior and lifecycle planning are required.

Choose this part when you need a compact radial SMD electrolytic capacitor with documented loss, leakage, ripple and endurance characteristics, and when automated assembly and traceable qualification are part of your design requirements.

If you would like pricing, availability details or a formal quote for UUG2C101MNJ1MS, please request a quote or contact sales with your project requirements and order quantities.