UUL0J470MCL1GS

The UUL0J470MCL1GS is a Nichicon UUL series aluminum electrolytic chip capacitor in a compact surface-mount chip can package. It is a polarized, chip-type electrolytic capacitor designed for high-density PCB mounting and long life under elevated temperature conditions.

Engineered for automotive and other demanding applications, this part combines a 47 µF capacitance at 6.3 V with a 5000-hour load life at +105°C, AEC-Q200 qualification, and RoHS compliance for reliable operation across -40°C to +105°C.

Key Features

• Capacitance & Voltage — 47 µF nominal capacitance rated at 6.3 V with ±20% tolerance at 120 Hz, 20°C.
• Long-life at elevated temperature — Rated load life of 5000 hours at +105°C; after the specified life the capacitance change is within ±30% and leakage current remains within the initial specified value.
• AEC-Q200 Qualified — Qualified to AEC-Q200 for designs requiring recognized automotive component qualification.
• Operating temperature range — Specified for -40°C to +105°C operation.
• Surface-mount chip can package — Chip-type, surface-mount radial can (SMD) package intended for high-density PC board assembly; part dimensions L: 5.8 × D: 5 mm with recommended land size L: 5.3 × W: 5.3 mm.
• Leakage and loss characteristics — Leakage current after 2 minutes at 20°C is ≤ 0.01 CV or 3 µA (whichever is greater); tangent of loss angle (tan δ) for 6.3 V is specified at max. 0.32 (measurement at 120 Hz, 20°C).
• Low-temperature impedance stability — For 6.3 V parts, Z(-25°C)/Z(+20°C) ≤ 4 and Z(-40°C)/Z(+20°C) ≤ 10 (measured at 120 Hz), aiding performance across cold-start conditions.
• Ripple current ratings — 36 mA at 120 Hz and 54 mA at 10 kHz (manufacturer-specified values).
• RoHS compliant — Meets the RoHS directive (2011/65/EU and EU2015/863) requirements.
• Soldering heat resistance — Meets characteristic requirements after exposure to a 250°C hot plate for 30 seconds and recovery to 20°C (per datasheet test conditions).

Typical Applications

• Automotive electronic modules — Suitable for board-level power filtering and smoothing in automotive systems where AEC-Q200 qualification and a high operating temperature are required.
• High-density PCB assemblies — Chip can SMD package is designed for surface mounting on tightly packed circuit boards.
• Temperature-challenged environments — Components and modules that must operate reliably between -40°C and +105°C.

Unique Advantages

• Proven long-life performance: 5000-hour load life at +105°C provides defined endurance for designs requiring extended high-temperature operation.
• Automotive-grade qualification: AEC-Q200 qualification supports use in automotive and other demanding applications that require recognized component-level qualification.
• Compact surface-mount form factor: Chip-type radial can (SMD) with a small footprint (5.8 × 5 mm) enables implementation on high-density PCBs without sacrificing capacitance.
• Measured electrical stability: Specified leakage current, tan δ, and low-temperature impedance ratios give clear, testable electrical limits for system design and validation.
• Regulatory compliance: RoHS compliance simplifies regulatory management for assemblies targeting regions enforcing RoHS requirements.

Why Choose UUL0J470MCL1GS?

The UUL0J470MCL1GS balances compact SMD packaging with long-term reliability metrics—5000 hours at +105°C and AEC-Q200 qualification—making it suitable for automotive and other temperature-stressed electronic assemblies. Its defined electrical characteristics (leakage, tan δ, impedance stability and ripple current ratings) give engineers measurable parameters for robust power-decoupling and smoothing designs on high-density PCBs.

Manufactured by Nichicon and compliant with RoHS requirements, this capacitor is targeted at designers and purchasers who need verified life, thermal performance, and automotive-grade qualification in a small surface-mount aluminum electrolytic platform.

Request a quote or submit an inquiry to receive pricing and availability for the UUL0J470MCL1GS and to discuss how this capacitor can fit your design requirements.