UVP1E100MDD

The UVP1E100MDD is a bi-polarized aluminum electrolytic capacitor in a compact radial-can package designed for general-purpose and entertainment electronics. Its bipolar construction supports circuits where polarity may reverse, and the part is supplied with radial leads for through-hole mounting.

With a rated capacitance of 10 µF at 25 V, a temperature range of –40 °C to +85 °C, and RoHS compliance, this capacitor addresses compact board-level requirements where bipolar performance, defined ripple capability, and a controlled lifetime are important.

Key Features

• Bipolar construction Bi-polarized capacitor suitable for circuits that experience polarity inversion or AC coupling.
• Electrical rating 10 µF nominal capacitance with a rated voltage of 25 V and capacitance tolerance of ±20% (measured at 120 Hz, 20 °C).
• Package & mounting Radial lead, radial-can package with 2 mm lead spacing and compact dimensions (L: 1.1 × D: 0.5 cm) for easy through-hole assembly.
• Operating range & lifetime Rated for –40 °C to +85 °C operation and specified endurance of 2000 hours at 85 °C (with polarity inversion per datasheet endurance conditions).
• Ripple current capability Rated ripple current of 42 mA at 120 Hz and 84 mA at 10 kHz for this 10 µF part; frequency coefficient data for the 10–47 µF range (120 Hz = 1.00, 10 kHz or more = 2.00) is provided in the series specification.
• Leakage current specification Series-level leakage current guidance: after 5 minutes’ application of rated voltage at 20 °C, leakage current is not more than 0.03 × C × V (µA), per datasheet.
• Regulatory status & marking RoHS compliant; sleeve marking is printed in white on a black sleeve per series documentation.

Typical Applications

• Entertainment electronics — Designed for standard bi-polarized use in consumer entertainment equipment where polarity conditions can vary.
• General-purpose electronic circuits — Suitable for board-level capacitor needs in equipment that requires a bipolar aluminum electrolytic capacitor.
• AC-coupled or polarity-inverting circuits — Used where capacitor polarity may reverse during operation and a bipolar device is required.

Unique Advantages

• Bipolar design for polarity tolerance: Enables use in AC-coupled and polarity-inverting circuits without requiring special polarity handling.
• Compact radial-can form factor: Small L × D footprint and radial leads simplify through-hole layout and placement in space-constrained assemblies.
• Defined ripple performance across frequency: Specified ripple currents at 120 Hz and 10 kHz (42 mA and 84 mA) and series frequency coefficients help predict behavior across typical operating frequencies.
• Specified endurance with polarity inversion: Endurance rating of 2000 hours at 85 °C (with polarity inverted every 250 hours) provides a measurable reliability baseline for design planning.
• RoHS compliant: Meets RoHS directive requirements for designs targeting regulated markets.

Why Choose UVP1E100MDD?

UVP1E100MDD positions itself as a compact, bi-polarized aluminum electrolytic solution for designers of consumer and general-purpose electronic equipment. Its combination of bipolar construction, defined ripple ratings, and endurance specification makes it suitable where polarity reversal and predictable lifetime behavior are design factors.

Choose this part when you need a small radial-can capacitor with clear electrical and environmental specifications (–40 °C to +85 °C, RoHS compliant) and measurable endurance and leakage characteristics documented in the series datasheet.

Request a quote or submit an inquiry to receive pricing and availability for UVP1E100MDD and to discuss lead times or volume requirements.