UVP1J3R3MDD

The UVP1J3R3MDD is a bi-polarized aluminum electrolytic capacitor from Nichicon's UVP series, designed for entertainment electronics and general-purpose circuits. It provides a 3.3 µF capacitance at a 63 V rating in a compact radial-can package with radial leads for through-hole mounting.

With a -40 °C to 85 °C operating range, RoHS compliance, and documented endurance characteristics from the UVP series, this part targets designs that require a compact, non-polar (bi-polar) electrolytic capacitor for ordinary electronic assemblies.

Key Features

• Electrical Characteristics — 3.3 µF nominal capacitance with ±20% tolerance and a 63 V rated voltage for general-purpose circuit needs.
• Bi-Polar Construction — Bi-polarized design suitable for applications where polarity may reverse; part of Nichicon's UVP bi-polarized series.
• Package and Mounting — Radial lead, can-style package with 2 mm lead spacing and overall size approximately L: 1.1 × D: 0.5 cm for compact through-hole layouts.
• Temperature and Lifetime — Rated to operate from –40 °C to +85 °C with an endurance specification of 2000 hours at 85 °C (series-level test condition).
• Ripple Current Performance — Rated ripple current values of 28 mA at 120 Hz and 56 mA at 10 kHz, useful for assessing AC stress in the target application.
• Leakage and Loss Characteristics — Series-level leakage current specification: after 5 minutes at rated voltage (20 °C), leakage is not more than 0.03 C·V (µA); tangent of loss angle (tan δ) values are provided in the series datasheet for design verification.
• Environmental Compliance — RoHS compliant (2011/65/EU, (EU)2015/863).

Typical Applications

• Entertainment Electronics — Suited to consumer entertainment equipment that uses bi-polar capacitors for signal paths or circuits where polarity may change.
• General-Purpose PCBs — Useful in a variety of general-purpose electronic assemblies requiring a compact, through-hole bi-polar electrolytic capacitor.
• Through-Hole Prototyping and Repair — Radial leads and a small can package make the part convenient for prototyping, repair, and retrofit tasks on through-hole boards.

Unique Advantages

• Bi-polar design for polarity flexibility: The UVP1J3R3MDD's bi-polar construction addresses applications that may see polarity inversion without requiring special polarity handling in the circuit.
• Compact through-hole footprint: Small can size (approximately 1.1 × 0.5 cm) and 2 mm lead spacing reduce board area while maintaining radial lead mounting convenience.
• Documented endurance: Endurance data from the UVP series (2000 hours at 85 °C with periodic polarity inversion) supports reliability assessments under elevated temperature stress.
• Frequency-aware ripple data: Provided ripple current ratings at 120 Hz and 10 kHz enable engineers to size the component against expected AC stress in the application.
• Regulatory compliance: RoHS conformity eases integration into products requiring restricted-substance compliance.

Why Choose UVP1J3R3MDD?

The UVP1J3R3MDD combines a bi-polarized aluminum electrolytic design with a compact radial-can package, making it appropriate for entertainment and general-purpose electronic designs that need a non-polar capacitor in a through-hole form factor. Its electrical specifications—3.3 µF at 63 V, defined ripple current figures, and series-level leakage and endurance characteristics—give engineers the data needed to assess suitability for a given circuit.

Designed and supported by Nichicon as part of the UVP bi-polarized series, this capacitor is suited for engineers and procurement teams seeking a verified, RoHS-compliant component with documented performance metrics for lifetime, temperature range, and ripple current behavior.

Request a quote or contact sales to discuss availability, lead times, and pricing for UVP1J3R3MDD and how it fits your project requirements.