UVP1V330MPD

The UVP1V330MPD is a bi‑polar aluminum electrolytic capacitor from Nichicon's UVP series, designed for general‑purpose and entertainment electronics applications. It delivers a 33 µF capacitance at a 35 V rating in a radial can package with radial leads, and is manufactured to RoHS requirements (2011/65/EU, (EU)2015/863).

Engineered for through‑hole PCB use, the component provides validated endurance and ripple performance for circuits that benefit from bi‑polarized capacitor behavior while offering predictable leakage characteristics specified by the UVP series datasheet.

Key Features

• Bi‑Polarized Architecture Standard bi‑polarized construction from the UVP series; endurance testing in the series includes polarity inversion during a 2000‑hour, 85°C qualification cycle.
• Capacitance and Voltage 33 µF nominal capacitance at a 35 V rated voltage with a capacitance tolerance of ±20% (120 Hz, 20°C).
• Package and Mounting Radial can with radial leads and a lead spacing of 3.5 mm for straightforward through‑hole PCB assembly.
• Operating Temperature and Endurance Rated for operation from −40°C to +85°C; endurance specified as 2000 hours at 85°C under the UVP series test conditions.
• Ripple Current Performance Specified ripple current ratings include 100 mA at 120 Hz (low frequency) and 200 mA at 100 kHz (high frequency) for this part.
• Leakage Current Specification Leakage current is defined per the UVP series: after 5 minutes’ application of rated voltage at 20°C, leakage current does not exceed 0.03CV (µA).
• RoHS Compliant Conforms to the RoHS directive (2011/65/EU, (EU)2015/863).

Typical Applications

• Entertainment Electronics Designed as part of a standard bi‑polarized series for entertainment electronics where bipolar capacitor behavior is required.
• General‑Purpose Circuits Suitable for a wide range of general‑purpose electronic circuits that specify a 33 µF, 35 V bi‑polar aluminum electrolytic capacitor.
• Through‑Hole PCB Designs Radial lead configuration with 3.5 mm lead spacing simplifies placement and soldering in through‑hole assemblies.

Unique Advantages

• Bi‑polar operation validated by endurance testing: Endurance characterization for the UVP series includes polarity inversion during a 2000‑hour, 85°C test cycle, providing documented behavior for bi‑polar use cases.
• Clear electrical specifications: Published values for capacitance, tolerance, rated voltage, leakage current formula, and ripple current make selection and verification straightforward.
• Through‑hole friendly package: Radial can and 3.5 mm lead spacing enable reliable mechanical retention and simple PCB layout for through‑hole designs.
• Wide ambient range: −40°C to +85°C operating range supports deployment across common consumer and entertainment environments.
• Regulatory compliance: RoHS conformity supports use in products that require restricted‑substance compliance.

Why Choose UVP1V330MPD?

The UVP1V330MPD delivers a practical combination of bi‑polar capacitor behavior, documented endurance, and defined ripple and leakage characteristics in a compact radial can package from Nichicon's UVP series. It is well suited for designers specifying a 33 µF, 35 V bi‑polar aluminum electrolytic capacitor for entertainment electronics and general‑purpose circuits.

Choosing this part provides predictable electrical parameters and environmental compliance from a recognized capacitor series, helping streamline component selection for through‑hole PCB assemblies that require bi‑polarized capacitor performance.

Request a quote or submit a quote to receive pricing and availability information for UVP1V330MPD. Provide part number and quantity to obtain a formal quote or to discuss lead times and ordering options.