PLF0E152MDO1

The PLF0E152MDO1 is a conductive polymer aluminum solid electrolytic capacitor in a radial lead can designed for power-focused applications. It combines low equivalent series resistance (ESR) and high allowable ripple current with an extended high-temperature load life.

Targeted at systems requiring robust power smoothing and decoupling, this part is suited for applications where sustained performance up to 105°C and AEC‑Q200 qualification are required.

Key Features

• Capacitance & Voltage: 1.5 mF (1500 μF) rated at 2.5 V for bulk decoupling and energy storage in low-voltage power rails.
• Low ESR: 8 mΩ ESR measured at 100 kHz, improving transient response and reducing loss in high-frequency switching environments.
• High Ripple Current: 5.5 A at 100 kHz and 2.75 A at 120 Hz, enabling use directly on switching converter outputs and other high-ripple circuits.
• Extended High‑Temperature Endurance: Load life of 2000 hours at 105°C, supporting continuous operation in elevated-temperature environments.
• Temperature Range: Operates from −55°C to +105°C for broad environmental tolerance.
• Radial Lead Package: 5 mm lead spacing in a radial can (L: 1.3 × D: 1.0 cm) for through‑hole mounting and robust mechanical connection.
• Assembly Compatibility: Designed to correspond to lead‑free flow soldering conditions for modern manufacturing processes.
• Reliability & Compliance: AEC‑Q200 qualified and RoHS compliant, aligning with industry reliability and environmental standards.
• Polarized Device: Polar configuration with ±20% capacitance tolerance at 120 Hz, 20°C for predictable charge storage behavior.

Typical Applications

• Automotive Power Modules: Bulk decoupling and smoothing on low‑voltage rails and DC‑DC converters in automotive electronic control units, leveraging AEC‑Q200 qualification and high ripple handling.
• DC‑DC Converter Outputs: Output filtering and energy buffering for switching regulators where low ESR and high ripple current reduce voltage ripple and heat generation.
• Motor Drive Electronics: Local energy storage and ripple suppression in motor driver power stages to support transient current demands.
• Sensor and ECU Power Conditioning: Stabilizing supply rails in sensor interfaces and embedded controllers operating across −55°C to +105°C.

Unique Advantages

• Improved Efficiency under Switching Loads: Low 8 mΩ ESR at 100 kHz minimizes I²R losses and supports efficient power conversion.
• High Ripple Endurance: Rated ripple currents of 5.5 A (100 kHz) and 2.75 A (120 Hz) allow placement close to switching elements to absorb high-frequency disturbances.
• High‑Temperature Durability: 2000‑hour load life at 105°C provides predictable aging behavior in thermally demanding applications.
• Automotive‑Grade Qualification: AEC‑Q200 qualification supports use in designs that require recognized component reliability standards.
• Through‑Hole Robustness: Radial lead can package with 5 mm lead spacing enables secure solder connections and mechanical resilience in harsh environments.
• Manufacturing Friendly: Compatible with lead‑free flow soldering processes to fit modern assembly lines.

Why Choose PLF0E152MDO1?

PLF0E152MDO1 offers a combination of high capacitance at low voltage, very low ESR, and elevated ripple-current capability packaged in a compact radial lead can. Its 2000‑hour load life at 105°C and AEC‑Q200 qualification make it a practical choice for engineers building reliable power systems for automotive and other demanding embedded applications.

Designed and manufactured by Nichicon as part of the PLF series, this part is intended for designs that require stable filtering and energy buffering under high-frequency switching and elevated-temperature conditions.

Request a quote or contact sales to discuss availability, pricing, and how PLF0E152MDO1 can fit your power subsystem requirements.