EN29LV320CT-70TIP2Y

The EN29LV320CT-70TIP2Y is a 32‑Mbit parallel NOR Flash memory device in the EN29LV320C series, organized as 4,194,304 bytes (4M × 8) or 2,097,152 words (2M × 16). It operates from a single 3.0 V supply (full range 2.7 V to 3.6 V) and provides high‑performance read access with typical access times as fast as 70 ns.

Designed for industrial applications, the device delivers fast program/erase performance and flexible boot sector architecture for firmware and code storage in embedded and industrial control systems requiring reliable non‑volatile storage under a wide temperature range.

Key Features

• Memory Organization — 32 Mbit capacity organized as 4M × 8 or 2M × 16 for parallel bus architectures and direct interfacing with high‑performance microprocessors.
• High Performance — Read access times as fast as 70 ns to minimize wait states in performance‑sensitive systems; typical active read current 9 mA (at 5 MHz).
• Program & Erase Speed — Word program time typically 15 µs, sector erase typically 100 ms, and chip erase typically 8 s for efficient firmware updates and manufacturing programming.
• Flexible Sector Architecture — Combination of eight 8‑Kbyte sectors and sixty‑three 64‑Kbyte sectors with 8‑Kbyte sectors configurable for top or bottom boot sectors to support multiple boot strategies.
• Data Protection & Security — Hardware sector locking, temporary sector unprotect for updates, and a secured silicon sector (128‑word area) that can be permanently protected against further program/erase operations.
• Reliability & Endurance — Minimum 100k program/erase cycles per sector and typical data retention of 20 years.
• Low Power Operation — Low active currents and less than 1 µA standby/automatic sleep current for power‑sensitive designs; program/erase current typically 20 mA.
• System Control Pins — Dedicated OE#, CE#, WE# signals plus RESET# hardware reset, WP# write‑protect and ACC acceleration function for controlled programming and boot protection.
• Industry Compatibility — JEDEC Common Flash Interface (CFI) support and JEDEC‑compatible command set for interoperability with standard tools and programmers.
• Voltage & Write Inhibit — Single VCC operation across 2.7 V to 3.6 V; low VCC write inhibit threshold below 2.5 V.
• Package & Temperature — Available in 48‑pin TSOP (Type 1) package; rated for industrial temperature range −40 °C to 85 °C.

Typical Applications

• Industrial Control & Automation — Non‑volatile program and configuration storage for PLCs, motor controllers and factory automation equipment operating across −40 °C to 85 °C.
• Embedded Systems & Microprocessor Boot — Top/bottom boot sector options and fast 70 ns access make this device well suited for firmware and boot code storage in embedded controllers.
• Networking & Communications Equipment — Reliable code storage and rapid program/erase support for field updates and firmware management in industrial networking nodes.
• Instrumentation & Test Equipment — Durable endurance and long data retention for firmware and calibration data in industrial and laboratory instruments.

Unique Advantages

• Fast, Deterministic Read Performance — 70 ns access time reduces or eliminates wait states in high‑performance microprocessor systems, improving system responsiveness.
• Flexible Boot & Update Strategies — Configurable 8‑Kbyte boot sectors (top or bottom) plus sector‑level erase/program enables in‑place firmware updates with minimal system disruption.
• Robust Protection Mechanisms — Hardware sector locking, WP# and secured silicon sector capability help safeguard critical boot code and IP.
• Industrial‑Grade Reliability — Rated for −40 °C to 85 °C, 100k program/erase cycles minimum, and 20‑year data retention for long life in demanding applications.
• Single‑Supply Convenience — 3.0 V single‑supply operation (2.7–3.6 V) simplifies power design across a range of industrial platforms.
• Standby Low Power — Sub‑microamp standby and automatic sleep modes reduce power draw in idle states, supporting energy‑conscious designs.

Why Choose EN29LV320CT-70TIP2Y?

The EN29LV320CT-70TIP2Y combines high read performance, flexible sector architecture and hardware protection features in an industrial‑grade parallel NOR Flash package. Its single 3.0 V supply range, fast program/erase times and JEDEC CFI compatibility make it suitable for embedded and industrial designs that require dependable non‑volatile storage for boot code, firmware and configuration data.

This device is positioned for designers who need deterministic read access, durable endurance, and secure sector protection in a compact 48‑pin TSOP package rated for −40 °C to 85 °C. Its combination of speed, protection and long data retention supports long‑lifecycle products and field update strategies.

Request a quote or submit a purchase inquiry to obtain pricing, lead‑time and availability for EN29LV320CT-70TIP2Y. Provide your quantity and any packaging or programming requirements to receive a tailored response.