EN29LV800DB-70NIP2A

The EN29LV800DB-70NIP2A is an 8.389 Mbit non-volatile NOR flash memory in a compact 48-ball WFBGA (4×6mm) package, organized as 1,048,576 bytes or 524,288 words. It operates from a single 3.0V supply (2.7V–3.6V) and provides parallel interface access with fast 70 ns read performance, making it suitable for industrial and embedded firmware storage and boot applications.

Designed as part of the EN29LV800D series, this device emphasizes predictable read/program timings, low standby current, and sector-level flexibility for field firmware updates and secure code storage in industrial temperature environments (−40°C to 85°C).

Key Features

• Memory Organization & Density — 8.389 Mbit capacity organized as 1M × 8 or 512K × 16, providing byte- or word-mode operation to match system requirements.
• Fast Read Performance — 70 ns access time supports high-performance microprocessor systems and helps minimize WAIT states.
• Single 3.0V Supply — Operates at 2.7V–3.6V for simplified power design and reduced system-level power complexity.
• Program & Erase Speed — Typical byte/word program time 8 μs, sector erase ~100 ms, and chip erase ~2 s for efficient in-system updates.
• Low Power — Typical active read current 9 mA, typical program/erase current 20 mA, and standby/automatic sleep current less than 1 μA to conserve energy in idle states.
• Flexible Sector Architecture — Mixed sector sizes (one 16-KB, two 8-KB, one 32-KB and fifteen 64-KB sectors in byte mode) enable targeted updates and reduce erase overhead.
• Sector Protection & Security — Hardware sector locking and temporary unprotect modes plus a 128-word secured silicon sector that can be permanently protected to prevent further modification.
• Reliability — Minimum 100K program/erase cycles per sector and 20-year data retention provide long-term robustness for deployed systems.
• Parallel Flash Interface & Control Signals — Separate CE#, OE#, and WE# controls reduce bus contention and simplify integration with parallel bus microcontrollers and processors.
• Industrial Temperature Range & Package — Rated −40°C to 85°C in a space-saving 48-ball WFBGA (4×6mm) surface-mount package for compact industrial designs.
• Standards & Features — JEDEC standard program/erase commands, DATA# polling and toggle-bit features, erase suspend/resume, and Common Flash Interface (CFI) support for predictable system behavior.

Typical Applications

• Industrial Control & Automation — Persistent firmware and configuration storage for PLCs, HMIs, and industrial controllers operating across −40°C to 85°C.
• Embedded Systems — Boot and code storage for microcontroller-based systems that require fast parallel read access and in-field reprogramming.
• Firmware / Boot Storage — Bottom-boot arrangement and sector-level erase/program support enable reliable firmware updates and secure boot regions.
• Communications & Networking Appliances — Non-volatile code and configuration memory for compact embedded networking devices where fast access and low standby current matter.

Unique Advantages

• Fast, Deterministic Read Access — 70 ns access time helps eliminate WAIT states in performance-sensitive systems.
• Granular Update Control — Flexible sector architecture and sector protect/unprotect modes reduce erase overhead and enable selective firmware updates.
• Low-Power Standby — <1 μA standby current preserves battery-backed or low-power systems during idle periods.
• Secure, Permanently Protectable Region — A dedicated 128-word secured silicon sector can be permanently locked for critical code or data protection.
• Compact Industrial Package — 48-ball WFBGA (4×6mm) minimizes PCB area while meeting industrial temperature requirements.
• Proven Endurance & Retention — Minimum 100K program/erase cycles and 20-year data retention support long-term product lifecycles.

Why Choose EN29LV800DB-70NIP2A?

The EN29LV800DB-70NIP2A delivers a combination of fast parallel read performance, flexible sector architecture, and industrial-grade reliability in a compact WFBGA package. Its single 3.0V supply operation, low standby current, and clear program/erase timing characteristics make it suitable for embedded and industrial designs that require predictable firmware storage and in-field update capability.

This device is well suited for designers targeting industrial control, embedded boot storage, and other applications that require secure sectors, sector-level protection, and long-term data retention backed by a minimum 100K program/erase cycle endurance.

Request a quote or submit your requirements to get pricing and availability for the EN29LV800DB-70NIP2A and accelerate integration into your next industrial embedded design.