LS1012ASE7EKB

The LS1012ASE7EKB is a single-core, 64-bit QorIQ Layerscape microprocessor based on the Arm® Cortex®-A53 core, specified at 600 MHz. It targets compact, fanless networking and IoT designs where low power, integrated I/O and hardware packet/security acceleration are required.

With a typical power envelope around 1 W and integrated networking, storage and USB interfaces, this device is positioned for trust-enabled gateways, consumer and mobile NAS, entry-level broadband gateways and automation applications that benefit from high integration and low thermal budget.

Key Features

• Core Single Arm® Cortex®-A53 64-bit core running at 600 MHz with NEON SIMD and dual-precision FPU; ECC-protected L1/L2 caches provide on-chip reliability.
• Memory & Cache Supports DDR3L memory via integrated memory controller; includes 32 KB L1 instruction and data caches and 256 KB coherent L2 cache (as described in product documentation).
• Networking & Storage Integrated support for up to two Gigabit Ethernet ports and one SATA 6 Gb/s port, with a hardware packet forwarding engine (PFE) capable of 2 Gbit/s IP forwarding to offload CPU packet processing.
• USB & Expansion Dual USB controllers including one SuperSpeed USB 3.0 controller with integrated PHY and one USB 2.0 controller; multi-protocol SerDes supports additional high-speed interfaces and a DMA-controlled PCIe Gen2 port per documentation.
• Security & Boot Built-in Secure Boot and Arm TrustZone® support for trusted execution and platform security.
• Package & Mounting 211-FCLGA package (9.6 × 9.6 mm), surface-mount mounting for space-constrained board designs.
• Power & Thermal Typical communications-processor power around 1 W (typical) and an operating temperature range of 0 °C to 105 °C.
• Compliance RoHS compliant.

Typical Applications

• Trust-enabled IoT Gateways — Secure edge processing and packet handling for connected sensor and device aggregation with hardware security primitives.
• Consumer and Mobile NAS — Low-power NAS and mobile storage solutions leveraging integrated SATA and GbE interfaces.
• Entry-level Broadband Ethernet Gateways — Fanless gateway designs benefiting from on-chip packet forwarding to reduce CPU load and power consumption.
• Building and Factory Automation — Compact controllers and networked I/O systems that require Ethernet connectivity and trusted boot/security features.

Unique Advantages

• Highly integrated I/O — Multiple GbE ports, SATA 3.0 and dual USB controllers reduce external PHY and controller requirements, simplifying BOM and PCB routing.
• Hardware packet offload — On-chip packet forwarding engine (PFE) delivers up to 2 Gbit/s IP forwarding, lowering CPU utilization for networking tasks.
• Low-power operation — Typical processor power around 1 W supports fanless and battery-powered applications while maintaining useful throughput.
• Built-in platform security — Secure Boot and Arm TrustZone® enable trusted device identity and secure firmware workflows.
• Compact package — 9.6 × 9.6 mm 211-FCLGA surface-mount package enables small form-factor board designs.
• Ecosystem and enablement — Supported by evaluation boards and a Linux BSP for accelerated prototyping and development.

Why Choose LS1012ASE7EKB?

The LS1012ASE7EKB combines a 64-bit Arm® Cortex®-A53 core with focused communications peripherals, hardware packet acceleration and platform security in a compact, low-power package. It is suited to designers building compact, fanless networking, storage and IoT gateway products that require integrated interfaces and trusted boot capabilities.

Backed by evaluation kits, a Linux BSP and NXP’s product longevity and ecosystem support (as documented), the LS1012ASE7EKB offers a practical balance of performance, integration and long-term availability for embedded networking and storage designs.

Request a quote or submit a product inquiry to begin procurement or evaluation of the LS1012ASE7EKB. Our team can provide pricing, availability and support options to help you move from prototype to production.