MPC8275ZQMIBA
| Part Description |
PowerPC G2_LE Microprocessor IC MPC82xx 1 Core, 32-Bit 266MHz 516-PBGA (27x27) |
|---|---|
| Quantity | 335 Available (as of October 8, 2026) |
| Product Category | Microprocessors |
|---|---|
| Part Series | MPC8275 |
| Manufacturer | NXP USA Inc. |
| Manufacturing Status | Active |
| Manufacturer Standard Lead Time | 52 Weeks |
| Datasheet |
Specifications & Environmental
| Co-Processors/DSP | Communications; RISC CPM | Core Processor | PowerPC G2_LE | Device Package | 516-PBGA (27x27) | ||
|---|---|---|---|---|---|---|---|
| ECCN | 5A991B4B | Ethernet | 10/100Mbps (3) | Graphics Acceleration | No | ||
| HTS Code | 8542.31.0001 | Moisture Sensitivity Level | 3 (168 Hours) | Mounting Method | Surface Mount | ||
| Mounting Type | Surface Mount | Number of Cores/Bus Width | 1 Core, 32-Bit | Operating Temperature | 0°C ~ 105°C (TA) | ||
| Package / Case | 516-BBGA | RAM Controllers | DRAM, SDRAM | REACH Compliance | REACH Unaffected | ||
| RoHS Compliance | RoHS non-compliant | Speed | 266MHz | Supplier Device Package | 516-PBGA (27×27) | ||
| USB | USB 2.0 (1) | Voltage – I/O | 3.3V |
Overview of MPC8275ZQMIBA – IC MPU MPC82XX 266MHz PBGA516
The MPC8275ZQMIBA is a single-core PowerPC G2_LE microprocessor in a 516-PBGA (27×27 mm) package, specified at 266 MHz. It targets embedded consumer applications that require an integrated communications-oriented processor with on-chip peripheral connectivity and memory controller support.
Designed for embedded communications and control tasks, the device combines a PowerPC G2_LE core with on-chip DRAM/SDRAM controllers, multiple Ethernet ports, USB support, and serial interfaces to simplify system integration and reduce external component count.
Key Features
- Core — PowerPC G2_LE single 32-bit core running at 266 MHz, dual-issue integer architecture derived from the EC603e microprocessor family.
- Caches — Separate 16 KB instruction and 16 KB data caches, four-way set associative with LRU replacement, improving instruction and data throughput for embedded workloads.
- Memory Controllers — Integrated DRAM and SDRAM controllers to support system memory interfaces and streamline board-level design.
- Communications Co-processors — On-chip communications and RISC CPM co-processors to offload protocol and packet processing tasks.
- Ethernet — Three 10/100 Mbps Ethernet controllers for multi-port network connectivity in consumer embedded products.
- USB — One USB 2.0 full/low-speed controller for peripheral connectivity.
- Serial and Control Interfaces — I2C plus multiple serial communications controllers (SCCs) and fast communication controllers (FCCs) per the MPC82xx family feature set.
- Package and Mounting — 516-PBGA (27×27) supplier device package, surface-mount footprint simplifies assembly in compact systems.
- Operating and IO Conditions — I/O voltage at 3.3 V and operating temperature range of 0 °C to 105 °C; RoHS compliant.
Typical Applications
- Consumer networking equipment — Multi-port 10/100 Mbps Ethernet and on-chip communications processors make this device suitable for home routers, gateways, and access points.
- USB-enabled peripherals — Integrated USB 2.0 controller enables connectivity for consumer peripheral devices and hubs.
- Embedded communications controllers — Use in consumer-oriented communication modules that require packet handling, protocol offload, and SDRAM support.
- Appliance control units — Embedded control applications in consumer appliances that benefit from integrated memory controllers and serial interfaces.
Unique Advantages
- Integrated communications acceleration — Dedicated communications and RISC CPM co-processors reduce host core overhead for protocol and packet handling.
- Multi-port networking — Three integrated 10/100 Ethernet controllers enable compact multi-interface network designs without external PHY aggregation.
- Memory subsystem integration — On-chip DRAM/SDRAM controllers simplify board design and reduce external memory interface complexity.
- Compact PBGA package — 516-PBGA (27×27) surface-mount package supports dense PCB layouts for space-constrained consumer products.
- Developer-friendly cache architecture — Separate 16 KB instruction and data caches with four-way associativity and LRU replacement to support responsive embedded software.
- Standards-aligned IO — 3.3 V IO and common interfaces (Ethernet, USB, I2C) enable straightforward integration with widespread peripheral components.
Why Choose MPC8275ZQMIBA?
The MPC8275ZQMIBA positions itself as an integrated, communications-focused PowerPC G2_LE microprocessor for consumer embedded designs. With a 266 MHz core, on-chip memory controllers, multiple Ethernet ports, and USB support in a compact 516-PBGA package, it reduces system BOM and supports consolidated board-level designs.
This device is well suited for designers of consumer networking and communication equipment who require a balance of processing capability, peripheral integration, and RoHS-compliant packaging. The combination of dedicated communications co-processors and standard interfaces helps accelerate development and system integration within the specified operating range and qualification.
Request a quote or submit an inquiry to receive pricing and availability information for MPC8275ZQMIBA and to discuss how it fits into your next embedded consumer design.

Date Founded: 2006
Headquarters: Eindhoven, North Brabant, Netherlands
Employees: 38,000+
Revenue: $10.53 Billion
Certifications and Memberships: ISO9001:2015, IATF16949:2016