P1010NSE5HFB
| Part Description |
PowerPC e500v2 Microprocessor IC QorIQ P1 1 Core, 32-Bit 800MHz 425-TEPBGA I (19x19) |
|---|---|
| Quantity | 1,179 Available (as of October 8, 2026) |
| Product Category | Microprocessors |
|---|---|
| Part Series | P1010 |
| Manufacturer | NXP Semiconductors |
| Manufacturing Status | Obsolete |
| Manufacturer Standard Lead Time | Contact Us |
| Datasheet |
Specifications & Environmental
| Co-Processors/DSP | Security; SEC 4.4 | Core Processor | PowerPC e500v2 | Device Package | 425-TEPBGA I (19x19) | ||
|---|---|---|---|---|---|---|---|
| ECCN | N/A | Ethernet | 10/100/1000Mbps (3) | Graphics Acceleration | No | ||
| HTS Code | N/A | Moisture Sensitivity Level | N/A | Mounting Method | Surface Mount | ||
| Mounting Type | Surface Mount | Number of Cores/Bus Width | 1 Core, 32-Bit | Operating Temperature | 0°C ~ 105°C (TA) | ||
| Package / Case | 425-FBGA | RAM Controllers | DDR3, DDR3L | REACH Compliance | REACH Unknown | ||
| RoHS Compliance | Unknown | SATA | SATA 3Gbps (2) | Security Features | Boot Security, Cryptography, Random Number Generator, Secure Fusebox | ||
| Speed | 800MHz | Supplier Device Package | 425-TEPBGA I (19×19) | USB | USB 2.0 + PHY (1) |
Overview of P1010NSE5HFB – IC MPU QORIQ P1 800MHz 425-TEPBGA
The P1010NSE5HFB is an NXP Semiconductors QorIQ P1 series single-core PowerPC e500v2 microprocessor running at 800 MHz in a 425-TEPBGA I (19×19) package. It combines a Power Architecture e500v2 core with integrated memory controllers and a broad set of high-speed interfaces targeted at cost-sensitive networking and embedded communications designs.
Targeted markets include wireless LAN access points, SOHO/SMB routers, Ethernet switch controllers, network attached storage, video surveillance and factory automation, offering a balance of performance, integration and built-in security features for connected embedded systems.
Key Features
- Core and Architecture – PowerPC e500v2 single 32‑bit core at 800 MHz with on‑chip caches (32 KB I‑cache, 32 KB D‑cache and an integrated frontside/L2 cache as described in QorIQ documentation).
- Memory – Integrated DDR3 and DDR3L memory controllers for flexible system memory configurations.
- Security Subsystem – Hardware security engine (SEC 4.4) with cryptographic accelerators, random number generator and secure fusebox; supports secure boot and on‑chip cryptography functions.
- Networking and Connectivity – Three integrated 10/100/1000 Mbps Ethernet ports, two SATA 3 Gbps ports, a USB 2.0 controller with PHY and additional interfaces including CANbus, SPI, I2C and DUART.
- Storage and I/O – RAID-relevant XOR engine in the security block and multi-channel DMA for efficient data movement to storage interfaces.
- Process and Power – Based on 45 nm technology for low‑power implementation (as described in QorIQ product materials).
- Package and Mounting – 425‑FBGA supplier device package, 425‑TEPBGA I (19×19), surface mount.
- Operating Range – Specified operating temperature range 0 °C to 105 °C.
Typical Applications
- Wireless LAN Access Points – Suitable for 802.11ac/802.11n access point controllers where integrated networking and security accelerate system development.
- SOHO/SMB Routers and Switches – Single‑core processing and multiple Gigabit Ethernet ports make it suitable as a controller for compact routers and Ethernet switches.
- Network Attached Storage (NAS) – Multiple SATA 3 Gbps ports and XOR engine support RAID and storage offload functions for small‑to‑mid capacity NAS designs.
- Video Surveillance and Industrial Control – Integrated interfaces and secure boot features help implement secure, connected camera controllers and factory automation nodes.
Unique Advantages
- Integrated networking and storage interfaces: Three GbE ports plus two SATA channels and USB 2.0 with PHY reduce external controller needs and simplify BOM.
- Hardware security acceleration: SEC 4.4 with AES/DES/PKHA/MDHA/RNG accelerators and secure boot support protects firmware and on‑device keys while offloading crypto workloads.
- Flexible memory support: Native DDR3 and DDR3L controllers enable a range of memory choices for performance and power tradeoffs.
- Low‑power process implementation: 45 nm implementation targets reduced power for always‑on networking and embedded devices.
- Compact BGA package: 425‑TEPBGA surface‑mount package provides a dense footprint for space‑constrained board designs.
- Extended operating temperature: Rated 0 °C to 105 °C to support deployments in warmer or thermally challenged environments.
Why Choose P1010NSE5HFB?
P1010NSE5HFB positions itself as a compact, security‑focused single‑core processor for embedded networking and storage applications. With integrated Gigabit Ethernet, SATA, USB and a dedicated security engine, it delivers a highly integrated platform that reduces external components while enabling secure, connected designs.
As part of the NXP QorIQ P1 family, the device is suited to developers building cost‑sensitive routers, access points, NAS units and industrial controllers who need a balance of compute, I/O integration and on‑chip security in a compact package.
Request a quote or submit a product inquiry to obtain pricing and availability for the P1010NSE5HFB. Our team can provide lead‑time information and support for design‑in considerations.

Date Founded: 2006
Headquarters: Eindhoven, North Brabant, Netherlands
Employees: 38,000+
Revenue: $10.53 Billion
Certifications and Memberships: ISO9001:2015, IATF16949:2016