UUG1V471MNJ1MS

The UUG1V471MNJ1MS from Nichicon is a chip-type aluminum electrolytic capacitor in the UUG series, offering a high-capacitance SMD can package optimized for compact assemblies. It provides 470 µF nominal capacitance at a 35 V rating with an operating temperature range of -40 °C to 85 °C and is supplied in embossed carrier taping for automated placement.

Targeted applications include automotive electronics where AEC-Q200 qualification and robust electrical endurance are required. The device balances high capacitance, measurable ripple handling, and long endurance for demanding board-level power applications.

Key Features

• Capacitance & Voltage — 470 µF nominal capacitance with a 35 V rated voltage and tolerance of -20% to +20%.
• Loss Characteristics — tanδ (DF) of 0.14 measured at 20 °C, 120 Hz, providing a defined dissipation factor for AC performance assessment.
• Ripple Current Capability — Rated low-frequency ripple current of 580 mA at 120 Hz and high-frequency ripple current of 870 mA at 10 kHz, supporting ripple handling across frequency ranges.
• Leakage Current — Specified leakage current of 493.5 µA (measured at 20 °C after initial application of rated voltage).
• Endurance & Temperature — 2000 hours lifetime at 85 °C under rated voltage; operating temperature range from -40 °C to 85 °C.
• Compact SMD Can Package — Case size φ12.5 × 13.5 mm (D × L) with surface-mount land size L: 1.28 × W: 1.28 cm, enabling dense PCB layouts.
• Automotive-Grade Rating — AEC-Q200 rated, indicating suitability for automotive electronic designs that require AEC qualification.
• Mounting & Packaging — Surface mount radial can (SMD) format supplied in embossed carrier taping for automated assembly.

Typical Applications

• Automotive Electronics — Designed for AEC-Q200-rated automotive systems that require 470 µF bulk capacitance in a surface-mount can package within -40 °C to 85 °C ambient ranges.
• On-board Power Filtering — Compact SMD format and defined ripple current ratings make it suitable for board-level smoothing and energy storage on power rails where space is constrained.
• High-Capacitance SMD Designs — Chip-type, higher-capacitance packaging supports applications needing increased capacitance density without large through-hole cans.

Unique Advantages

• AEC-Q200 Qualification: Provides automotive-grade assurance for designs requiring industry-recognized component qualification.
• High Bulk Capacitance in Compact Can: 470 µF in a φ12.5 × 13.5 mm SMD package enables higher capacitance density for space-constrained PCBs.
• Frequency-Qualified Ripple Handling: Specified ripple current at both 120 Hz and 10 kHz supports predictable performance across low and high-frequency ripple profiles.
• Long Endurance at Elevated Temperature: 2000 hours at 85 °C under rated voltage supports extended field life in thermally demanding environments.
• Pick-and-Place Friendly Packaging: Embossed carrier taping simplifies automated placement and reduces assembly handling time.
• Clear Electrical Characterization: Published tanδ and leakage current values enable straightforward selection and margin calculation during design.

Why Choose UUG1V471MNJ1MS?

The UUG1V471MNJ1MS combines a high nominal capacitance and 35 V rating with AEC-Q200 qualification and a compact SMD can footprint, delivering a balanced solution for designers needing robust bulk capacitance in compact, surface-mounted form factors. Its specified ripple current ratings, defined loss tangent, and measured leakage current make electrical performance predictable for power rail smoothing and energy storage applications.

This capacitor is well suited for teams designing automotive-grade electronics or compact power subsystems that require automated assembly and long-term endurance at elevated temperature. Choosing this Nichicon UUG part provides clear, traceable specifications to support reliable BOM decisions and system-level performance planning.

If you would like pricing, lead-time information, or a formal quotation for UUG1V471MNJ1MS, please request a quote or contact sales to submit your requirements.