UUG2E330MNJ6MS

The UUG2E330MNJ6MS is a chip-type aluminum electrolytic capacitor in a surface-mount can designed for higher-capacitance SMD applications. It delivers 330 µF nominal capacitance at a 25 V rating with a ±20% tolerance and is sized as φ12.5 × 21 mm for compact power-density designs.

Targeted for demanding electronics where robust smoothing, bulk decoupling and ripple handling matter, this part combines high capacitance, measurable ripple capability and AEC-Q200 reliability for use in professional and automotive-related power circuits.

Key Features

• Capacitance & Voltage — 330 µF nominal capacitance at 25 V with ±20% tolerance (measured at 120 Hz, 20 °C).
• Surface-mount chip package — Chip-type radial can in an SMD form factor sized φ12.5 × 21 mm (L: 21 mm × D: 12.5 mm) for compact board placement.
• Ripple current capability — Rated ripple current of 340 mA at 120 Hz and 544 mA at 10 kHz, supporting both low- and high-frequency filtering tasks.
• Leakage current — Specified leakage current of 430 µA; datasheet leakage reference is I ≤ 0.03 × C × V (µA) for verification methods.
• Endurance — Designed for 2000 hours at 85 °C under rated voltage with capacitance change within ±20% and controlled tan δ increase.
• Temperature range — Operates from −40 °C to +85 °C to suit a wide range of environmental conditions.
• Automotive-grade rating — Meets AEC‑Q200 ratings for applications requiring automotive-level component qualification.
• Assembly-ready packaging — Supplied on embossed carrier taping for automated pick-and-place and high-throughput assembly.

Typical Applications

• Automotive power rails — Bulk smoothing and decoupling on 12 V/24 V subsystems and electronic control units where AEC‑Q200 qualification is required.
• DC‑DC converters — Input/output bulk capacitor for converter stages needing high capacitance in an SMD can.
• Power management modules — Energy storage and ripple suppression for power-supply rail stabilization in industrial and embedded systems.

Unique Advantages

• High bulk capacitance in an SMD can — 330 µF in a φ12.5 × 21 mm chip reduces board area compared with discrete through-hole alternatives.
• Measurable ripple handling across frequencies — Specified ripple current at both 120 Hz and 10 kHz lets designers size capacitors for real-world low- and high-frequency noise suppression.
• Automotive-capable reliability — AEC‑Q200 rating supports designs intended for vehicle electronics and other reliability-focused markets.
• Long endurance at elevated temperature — 2000 hours at 85 °C under rated voltage provides predictable aging and lifetime planning for long‑running systems.
• Production-ready packaging — Embossed carrier taping simplifies integration into SMT assembly flows.

Why Choose UUG2E330MNJ6MS?

The UUG2E330MNJ6MS brings a combination of high capacitance, defined ripple performance and automotive-level qualification in a compact surface-mount chip can. Its specification set—330 µF at 25 V, wide operating temperature of −40 °C to +85 °C, AEC‑Q200 rating and 2000‑hour endurance at 85 °C—makes it suitable for power-dense designs where reliability and predictable aging are required.

This part is appropriate for engineers designing power supplies, DC‑DC converters and automotive electronics who need a compact, assembly-friendly capacitor with documented ripple and leakage characteristics for robust system-level performance.

If you would like pricing, availability or a formal quote for UUG2E330MNJ6MS, please request a quote or contact sales to submit your requirements and receive support for ordering and integration.