UUP1C100MCL1GS

The UUP1C100MCL1GS is a chip-type, bi-polar aluminum electrolytic capacitor designed for surface-mount use on high-density printed circuit boards. It delivers a 10 µF capacitance at 16 V in a compact 5.8 × 5.0 mm can-style SMD package and is suitable for automated assembly fed from carrier tape.

Engineered for demanding thermal environments, this capacitor is rated for operation from −55 °C to +105 °C, is RoHS compliant, and carries AEC-Q200 qualification for applications requiring established reliability criteria.

Key Features

• Electrical Performance — 10 µF capacitance with a 16 V rated voltage and ±20% tolerance provides predictable filtering and coupling performance for specified voltage domains.
• Bipolar Construction — Bi-polarized design supports AC and bipolar signal conditions without polarity constraints specific to single‑polarity electrolytics.
• Wide Temperature Range — Rated for operation from −55 °C to +105 °C, with endurance specified as 1000 hours at 105 °C under rated voltage with periodic polarity reversal.
• Reliability & Qualification — AEC-Q200 qualified and RoHS compliant; leakage current specification: after 2 minutes at rated voltage (20 °C) leakage is not more than 0.05CV or 10 µA, whichever is greater.
• Ripple Performance — Specified ripple currents of 23 mA at 120 Hz and 34.5 mA at 10 kHz, with frequency coefficients defined in the datasheet for design calculations.
• Assembly-Friendly Package — Chip-type can in an SMD package (radial, can - SMD) sized 5.8 × 5.0 mm with recommended land size 5.3 × 5.3 mm; compatible with carrier-tape fed automatic mounting.
• Solder and Storage Robustness — Meets resistance-to-soldering-heat requirements (hot plate 250 °C for 30 s) and shelf-life restoration procedures per datasheet endurance conditions.

Typical Applications

• Automotive electronic modules — Fits surface-mounted circuits in automotive systems where AEC-Q200 qualification and a −55 °C to +105 °C operating range are required.
• Power management and filtering — Used for local decoupling, smoothing and AC-coupling in circuits that require a bipolar electrolytic solution at 16 V.
• High-density PCB assemblies — Compact chip form factor for placement on space-constrained boards and automated surface-mount production.
• Automated manufacturing — Compatible with carrier-tape fed automatic mounting machines for streamlined volume assembly.

Unique Advantages

• Bi-polar flexibility: Eliminates polarity constraints typical of single‑polarity electrolytics, simplifying design choices for AC or bipolar signal paths.
• Automotive-grade reliability: AEC-Q200 qualification combined with a tested 1000-hour endurance at 105 °C supports reliable operation in temperature-stressed environments.
• Compact SMD can: 5.8 × 5.0 mm package and 5.3 × 5.3 mm recommended land pattern enable high-density PCB layouts without sacrificing performance.
• Assembly efficiency: Carrier-tape compatibility and surface-mount form factor reduce handling and improve throughput in automated production lines.
• Measurable ripple and leakage specs: Published ripple current values at 120 Hz and 10 kHz and a defined leakage current limit allow accurate thermal and performance budgeting.
• RoHS compliant: Environmental compliance for markets requiring restricted substance conformity.

Why Choose UUP1C100MCL1GS?

UUP1C100MCL1GS combines a bipolar aluminum electrolytic construction with a compact, assembly-friendly SMD can and defined electrical and thermal endurance characteristics. Its AEC-Q200 qualification and −55 °C to +105 °C operating range make it a fit where reliability under temperature stress and automated production compatibility are priority requirements.

This part is suited to engineers designing compact power and signal circuits—particularly in automotive and other temperature-challenged environments—who need clear, datasheet-backed electrical and ripple specifications and straightforward placement on high-density PCBs.

Request a quote or submit an inquiry to evaluate availability, lead times and pricing for UUP1C100MCL1GS for your next design.